Long Life Fouse Light 1808 3v 0.06w For Bluetooth Headset, Speaker
Light
Long service life: under proper current and voltage, the service
life of LED can reach more than 50000 hours.
High brightness, low heat, environmental protection: LED is made of
non-toxic materials, unlike fluorescent lamps, which contain
mercury, which will cause pollution. At the same time, LED can also
be recycled.
The 1808 is one of the most mature LED packaging products in the
automotive industry, which has been fully verified for its compact
size and reliability. It is especially suitable for a variety of
LED packaging standards. 1608 is available in many versions with
different color and brightness levels.
Advantage:
Greatly reduce package size
Compared with TOPLED and mini TOPLED, the lumen output is
consistent or even higher
Full color and brightness coverage
High flexibility for different designs (e.g. bar charts)
A package size suitable for various applications
characteristic:
Package: white SMT package
Typical radiation: 120 °
Corrosion resistance grade: 2B
Vehicle certification: aec-q102
ESD: 2 kV (HBM, level 2)
Dimensions: 1.6 x 0.8 x 0.6 mm
Apply:
Backlight of lamp group and key
Electronic equipment
Internal lighting (as shown in the environment diagram)
monitor
Package Structure:
4.Absolute Maximum Ratings(Ta=25℃)
| Parameter | Symbol | | Unit |
| Rating |
| Power Dissipation | Pd | 60 | mW |
| Forward Current | IF | 20 | mA |
| Peak Forward Current | IFP | 30 | mA |
| Operating Temperature | Topr | -30~85 | ℃ |
| Storage Temperature | Tstg | -30~100 | ℃ |
| Junction temperature | Tj | 105 | ℃ |
| Electrostatic Discharge | ESD | 2000(HBM) | V |
5.Electrical and optical characteristics(Ta=25℃)
| Parameter | Symbol | Test condition | Min | Typ | Max | Unit |
| Forward Voltage | VF | IF=20mA | 2.7 | - | 3.3 | V |
| Luminous Flux | ф | IF=20mA | 6 | - | 9 | LM |
| Color Temperature | CCT | IF=20mA | 2500 | - | 6500 | K |
| Reverse current | VR | VR=7V | 0 | μA |
| Color Rending Index | Ra | IF=20mA | 90 | - |
| View Angle | 2θ1/2 | IF=20mA | 120 | deg |
6.Typical Electro-Optical Characteristics Curves(Ta=25℃)
| Parameter | Symbol | Test condition | Min | Typ | Max | Unit |
| Forward Voltage | VF | IF=20mA | 2.7 | - | 3.3 | V |
| Luminous Flux | ф | IF=20mA | 6 | - | 9 | LM |
| Color Temperature | CCT | IF=20mA | 2500 | - | 6500 | K |
| Reverse current | VR | VR=7V | 0 | μA |
| Color Rending Index | Ra | IF=20mA | 90 | - |
| View Angle | 2θ1/2 | IF=20mA | 120 | deg |
Typical Electro-Optical Characteristics Curves(Ta=25℃)
Rank list
IV Rank:
| Min | Max | Unit | Condition |
| 6 | 7 | LM | IF=20mA |
| 7 | 8 |
| 8 | 9 |
VF Rank:
| Min | Max | Unit | Condition |
| 2.7 | 2.8 | V | IF=20mA |
| 2.8 | 2.9 |
| 2.9 | 3.0 |
| 3.0 | 3.1 |
| 3.1 | 3.2 |
Reliability Test
| Test Item | Test Conditions | Standard | Qty (Pcs) |
| Life Test | 25℃,1000Hrs@150mA | / | 20 |
| High Temperature | 85℃,1000Hrs@150mA | / | 20 |
| Low Temperature | -40℃,1000Hrs@150mA | / | 20 |
| High Humidity Heat | 85℃,85%RH, 1000Hrs@150mA | / | 20 |
| Low Temperature Storage | -40℃,1000Hrs | JEITA ED-4701 200 202 | 20 |
| High Temperature Storage | 100℃,1000Hrs | JEITA ED-4701 200 201 | 20 |
| Temperature Cycle | (-40'C 30mins --25'C(5mins)--100'C(30mins) ,Temp changing
rate:3+/-0.6'C/min) | JEITA ED-4701 100 105 | 20 |
| Thermal Shock | -40'C(15mins) --100'C(15mins),changing time <5mins ,300C | MIL-STD-202G | 20 |
| Pulse Life Test | Tp=1ms,DC=0.1,D=Tp/T @ 3×150mA | / | 20 |
| ESD Test(HBM) | 2000V,200V/Step, Forward & Reverse Test both 3times | AEC (Q101-001) | 20 |
| Soldering Resistance | 260±5℃,10S,3times Pre-treatment 30℃,70%RH | JEITA ED-4701 300 302 | 20 |
| Reflow IV Decay | 260±5℃,10S,1time Pre-treatment 30℃,70%RH,168Hrs | / | 20 |
Cautions:
The encapsulated material of the LEDs is silicone. Therefore the
LEDs have a soft surface on the
Top of package. The pressure to the top surface will be influence
to the reliability of the LEDs. Precautions Should be taken to
avoid the strong pressure on the encapsulated part. So when use the
picking up nozzle,The pressure on the silicone resin should be
proper.
Soldering iron :
When hand soldering, the temperature of the iron must less than
300℃ for 3 seconds
The hand solder should be done only one times
SMT Reflow Soldering Instructions SMT :
Reflow soldering should not be done more than two times
When soldering , do not put stress on the LEDs during heating
The recommended reflow soldering profile as following
Product features:
Adopt good quality chip and frame ,antistatic good stability Ultra
low attenuation
High brightness ,low attenuation high color rendering
Minimum 70,80,90 95 CRI options
Strong welding and good stability undead light
Product series and company logo on the front
CE ROHS LM80 Certification
Product Process:
