OMCS Central Feeding System.pdf
Central Feeding System, Central Conveying System, Plastic Loading System, Plastic Material Loading System, Plastic
Central Feeding System
Utilizing the method of vacuum conveying, Orste Central Material
Feeding/Conveying System (OMCS) transports plastic materials from
storage silos to the central dehumidifying & drying system through
centralized piping, and then convey the dried material to each
molding machine. OMCS is suitable for the integrity of the material
of huge capacity, eliminates waste and improves the cost
effectiveness of the factory.
Continuous auto-operation
Various dosing & mixing for different colors and materials
Effective instant recycling which can mix regrind and new material
flexibly
Offer you the most flexibility to easily be expanded or modified
equipment, make sure your production safer and more reliable and
keep the best working environment.
The Central Feeding System mainly include the following parts, and it can be expanded to
include the dehumdifying drying system, granulating recycling
system to make the whole factory run automaticall.
Ideal design of integrating the monitoring panel and the control
panel.
Friendly interface and accurate control.
Operating and monitoring by a single personnel and can be linked
with a PC.
Conveying time, material types, and pipe cleaning time of each
station are adjusted by the control station.
Displaying panel shows you how stations, dryers and storage silos
work, such as on/off, full or lack of material, and material types
of each station.
Extensive interface allows easy expansions up to 40 stations for
future demands.
Compact and durable.
Operating status:
Display the operating status of machines.
Set-up status:
Display the set up status, such as working stations, material
types, material conveying time, and pipe cleaning time.
Abnormal:
Display abnormal machines and material type.
Ideal design of integrating the monitoring panel and control panel,
User-friendly interface, Compact & Durable, Small space to make
more productive use of factory floor space.
High-pressure Blower
Pressure air adjustable.
Maximum conveying distance can be 150 meters.
Suitable for conveying the material of large capacity.
Stainless steel made to avoid pollution of materials. Quick
coupling devices for quick set-up or easy disconnected with pipes.
Dust-removing Combination: Vortex Cylone & Pulse Dust Collector
Collect dust from the conveying system efficiently.
Double protections for high-pressure blower in operation. Easy to
maintain: only to change the filter on time and clean conveniently.
Dedicated and compact design.
Material Cut-off Valve: Stainless steel made, durable device design.
Air Cut-off Valve: Stainless steel made, reliable device design.
Compression Couples: Stainless steel made, connect pipes to construct the
completely-closed central vacuum conveying system.
Central material feeding system consist of many parts, Central
material room is one of the most important part in this system. For
some hygroscopic materials, completely drying before feeding to
each molding machine is of great importance for plastic products
production. In the above picture, 1 pcs of honeycomb dehumidifier
is applied with 3 pcs of OHD-O hopper dryers to provide dry air for
drying of plastic resins in the hopper dryers. The dried materials
can be directly feeding to each molding machine for prodcution.
| Model | Blower (Hp) | IMMs (set) | Material | Throughput (Kg/H) | Feeding Point (pcs) | Max. Feeding Distance (m) | Max. Feeding Height (m) | Remarks |
| OMCS-5 | 5 | 5 | 1 | 500 | 5 | 20 | 5 | To be Customized |
| OMCS-10 | 7.5 | 7 | 4 | 800 | 10 | 50 | 8 | To be Customized |
| OMCS-20 | 10 | 14 | 6 | 800 | 20 | 80 | 10 | To be Customized |
| OMCS-30 | 10 | 22 | 8 | 800 | 30 | 80 | 10 | To be Customized |
| OMCS-50 | 10 | 42 | 8 | 800 | 50 | 80 | 10 | To be Customized |
| OMCS-80 | 15 | 70 | 10 | 1500 | 80 | 200 | 20 | To be Customized |
| OMCS-100 | 20 | 88 | 12 | 2000 | 100 | 300 | 30 | To be Customized |
