Two In One Compact Plastic Drying Loader Dryers Drying Hopper Loading Dryers ODL-80

ODL Drying Loader Drying Hopper.pdf

Naming Principle of Plastic Pellet Hopper Dryer

ODL – xxx – xxx

① ② ③

① Orste Drying Loader

② Hopper Capacity (L)

③ Loader Model

Product Features of Plastic Pellet Hopper Dryer

• Material-contact surface made of stainless steel to eliminate material contamination.

• The closely casting aluminum shell ensures excellent insulation.

• Hot air inlet elbow design can effectively avoid burning caused by dust piling up at the bottom of the pipe heaters.

• The hopper design is convenient for cleaning and material change.

• Accurate temperature controller guarantees easy control of temperature.

• Overheat protection device makes machine run safely and reliably.

• Dust-proof mute blower prevents dust from polluting material.

• Material window in hopper and base makes it convenient to observe the material usage.

Working Principle of Plastic Pellet Hopper Dryer

The plastic resin is loaded by the vacuum loader to the drying hopper, after drying, the dried resin is loaded to the feeding port of the molding machine. It's suitable for normal plastic resin drying, not suitable for hygroscopic resin drying. For drying of hygroscopic plastic granules, low dew-point dehumidifying dryers are needed for drying.

Parameters / Specifications of Plastic Pellet Hopper Dryer

Application Case of Plastic Pellet Hopper Dryer

Simple Introduction of Plastic Pellet Hopper Dryer

ODL drying loader series is the combination of hopper dryer and vacuum auto loader, it has the function of drying and loading by itself. Usually, the auto loader is responsible for two directions loading, load the plastic materials to the hopper dryer and load the dried resin to the IMM or extruder or other place. Two piece of OMH micro-switch hopper receivers or one piece of OMH and one piece of OPH photo-sensor hopper is equipped for the machine.

It is suitable for drying of non-hygroscopic plastic pellets, like PVC, PP, PE and etc. A floor stand is always applied for both the hopper dryer and the auto loader, for models below ODL-240, castors are standard equipped for easy movement, for bigger models, castors are not equipped. The machine should be installed within 5 meter from the molding machine.

Matters Needing Attention

Electrical installation of the machine should be done by qualified electricians.

Connecting the cooling water (if needed) after the machine is installed in a appointing place, make sure the inlet and outlet water pipe is in good condition.

Before connecting to AC Power Source, turn power switch to OFF position. While AC power source is connected, make sure specifications and overload protection rating of the power switch are suitable and reliable. When the machine is under care or maintenance, turn off both power switch and automatic operation switch.

Dongguan Orste Machinery Equipment Co., Ltd. was established in 2007 in “Made in China” City, Dongguan, Guangdong Province. After many years of growth and development, Orste has become a technology driven and innovative enterprise with independent development ability, integrating design, manufacturing, sales and maintenance.

We have been awarded ISO9001 certification. Orste now owns 1 manufacturing factory in Dongguan and 12 sales agent service centers in many cities in China including Tianjin, Jinan, Suzhou, Shanghai, Wenzhou, Fuzhou, Wuhan, Changsha, Chongqing and etc. With a foothold set in China, we are serving global markets. Orste devotes itself to improving the product quality and working environment in plastic factories by supplying integral automation systems to them.

With many years of experience and accumulation in Dehumidifying and Drying, Material Conveying, Heating and Cooling, Granulating and Recycling, Mixing and Blending, and upholding the principle of “Focusing on Product Details, Pursuing Excellent Quality”, Orste Machinery is an industry leader with its mature technology in peripheral equipment of plastic molding.

Orste’s large scale central material feeding system and cooling water circulation system including three major systems of centralized raw material drying, water temperature control and metering & mixing, are extensively applied in plastic injection molding industry. The main products of the company are a series of high-tech products including Dehumidifying Dryer, Hopper Dryer, Auto-loader, “Three-in-one” Compact Dryers, Water/ Oil Mold Temperature Controller, Industrial Cooling Machine, Granulator, Mixer, Masterbatch Doser and Vibrating Screen.

With the principle of customer satisfaction first, we take value contribution as our responsibility and constantly review the market adaptability of our products to timely seize the latest trend in industry, and maintain the uniqueness and technological edge of products. Through proactive listening, delicate service, modest attitude, Orste Machinery always maintains close contact with its customers.