Hydraulic flange separator
1.Suitable for maintenance and repair of pipeline flanges and valve
replacement applications
2. Interlocking design
3. Insertion point is 6mm
4. The whole is separated without friction, smooth parallel
movement, eliminating flange damage
5. The stepped open design allows each step to withstand the
maximum load
6. Integrate fewer parts, durable and easy to maintain
7. Safety pads are included in the hydraulic separation
8. Maximum working pressure:700Bar
9. weight:7.5kg
Product Description:
1. Hydraulic flange separator is made of alloy steel forging
material.
We will label each set of equipment before leaving the factory so
that it can be traced back later.
2. Our products usually maintain the standard design, after a few
years of use, you only need to replace the seals and you can reuse
them.These seals are standard parts, you can buy them all over the
world.
3. You can also customize according to your own environment
requirements, and we will manufacture products that meet your
requirements according to your requirements.
Technical data
| Type | Max(KN) | Tip Clearance(mm) | Maximum Spread(mm) | Spreader Type | Capacity(cm3) | weight(Kg) |
| FSH-14 | 125 | 6 | 81 | Hydraulic | 78 | 7 |
