Hot Melt Gum Glue For Making Foam Tape Filament Tape Craft Paper
Tape
Product description
It is a synthetic rubber based hot melt pressure sensitive adhesive
specifically developed for tape applications where good permanent
adhesion is required.
The product is featured high tack and peel, good wetting to
substrates and oil resistant.
Technical data
| Appearance : | Yellow translucent solid |
| Color (Gardner) : | ≤ G6 |
| Softening Point (R&B) : | 100℃ |
| Viscosity (Brookfield) :@160℃ | 10,000 cps |
Operating guide
The material can be applied by slot or roll coating applicators.
Suggested operation temperature is 150 – 1800C for both, depending
on machines, substrates, and plant conditions.
Package
6.25kg or 1kg block wrapped with siliconized release paper,
25kg/box or 180kg fibre drum. Please consult the sales
representative for special requirements.
Storage condition
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original packages under dry
and clean conditions at ambient temperature below 35℃ and above 5℃.
Direct sunlight and moisture condensation must be prevented.
Operating Precautions
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal protective clothing
and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
generated. Rotate stocks and using the oldest stock first.
