Customized Sports Gear Wheel Is Suitable Electroplating 5/6 Gear Shift Knob Automatic Cartoon Shift Cover

FAQ:

Q:How about sample policy?

If we have the sample in stock .we will provide free sample to u. if we don't have in stock . then u should pay the sample fee . any way . the sample fee will pay back to u. when u confirm the order
Sample fee is charged by the shippign company . Client should pay it :)

Q: What’s the best way to mix this?
A: You’ll want to make sure that you have 3 parts base resin and 1 part curing agent measured precisely, by volume. Pour each into your mixing bucket, and we recommend mixing by hand for at least 3 minutes and between 3-5 minutes or until it is fully mixed. Be careful to scrape the
sides while mixing, but when pouring, do not scrape the sides. This can impart unmixed material that may cling to the side and has not been incorporated. Don’t worry about any bubbles in the mixture, they will all work themselves out.
Q: How long does it take to cure, and what temperatures can I pourthis in?
A: Our optimum environment temperature range is 72° - 84°F (in a clean, temperature controlled environment. In that temperature range, it will begin to gel in 20-30 minutes, and cure rock hard within 24 hours.Temperatures under 70° will slow the curing process even more, and the closer you get to 60° the curing process will stop. Above 85°, it will begin to accelerate curing, leading to cracking, shrinking and other negative results.
Q:When Can I Demould?
A: Our optimum environment temperature range is 72° - 84°F in a clean temperature controlled environment. In that temperature range, you can demould between 18 and 24 hours, and its optimal workability will be at 24-30 hours. At 30 hours it will sand and plane as easy as wood!