Description:
Table Top System is a high performance two component Clear epoxy
system designed for Table Tops, Bars, Wood finishes, See-Through
Encapsulations, Artwork, and other applications requiring a clear,
strong, plastic coating specifically designed to resist Yellowing
caused by the sun and other Ultra Violet light sources.
The material has an easy to use 1 to 1 by volume mix ratio,
maintains its integrity over sharp corners, and it has excellent
air release qualities and a relatively fast set time for an epoxy
coating.
High Gloss
Clear, strong, plastic coating specifically designed to resist
yellowing.
Versatile
Can be used for a wide variety of applications.
Durable
High performance and produces a tough, high gloss, water resistant
coating.
Precautions:
Adjust the amount of glue according to the operating time and
amount to avoid waste. When the temperature is lower than 15℃,
please preheat the A glue to 30 ℃ before adjusting the glue, easy
to operate (A glue will thicken when the temperature is low); The
lid must be sealed after use to avoid product scrap due to moisture
absorption. When the relative humidity is greater than 85%, the
surface of the cured product will easily absorb the moisture in the
air and form a layer of white mist. Therefore, when the relative
humidity is greater than 85%, it is not suitable for room
temperature curing. It is recommended to use heated curing.
Specification:
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
FAQ:
1.Q: Are your a trading company or factory?
A: We are factory also trading company.
2.Q: What is the advantage of your products?
A: We are professional manufacturer in this field for many years
and have own exporting department and technical team.
3.Q: How can I get the price?
A: Please send an enquiry to us by email, we will reply your email
within 24 hours.
4.Q: What's the warranty of your goods?
A: We guarantee the products for one years.If any complains, please
send email to us.
5. Q: Does your company accept customization?
A: We have our own factory and excellent design team, and we accept
OEM/ODM/Trial.
6.Q: What about the cooperation process?
A: Confirm details of order, Deposit, Arrange production, Pay the
balance, Shipment.
7.Q:Can you accept the sample order?
A: Yes.
8.Q:How about your delivery time?
A: Its usual 3-5 days after payment.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Company Display:
