Juniper Compatible 40G QSFP+ Transceiver SR4 850nm 100m DOM MPO MMF
Juniper Compatibility Switches QSFP+ 40G SR4 850nm 100m DOM MPO MMF Optical Transceiver Module
Product Features
● Supports 9.95 to 10.3125Gb/s bit rates per Channel
● Four-Channel ,1x12 MPO receptacle
● Hot pluggable QSFP+ form factor
● VCSEL 850nm array Technology
● Applicable for 100m on OM3 MMF,150mon OM4 MMF.
● Built-in digital diagnostic functions
● Low power consumption, < 1.5W
● Unretimed XLPPI electrical interface
● Operating case temperature: 0°C to 70 °C
Applications
● 40GBASE-SR4 40G Ethernet
● Datacom/Telecom switch & router connections
● Data Aggregation and Backplane Applications
● Proprietary Protocol and Density Applications
● Infiniband transmission at 4CH SDR, DDR and QDR
● Other optical links
Product Descriptions
Olinkcom’s OLSQ854XM-CDS1 is a Four-Channel, Pluggable, Parallel,
Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications.
This transceiver is a high performance module for short-range
multi-lane data communication and interconnect applications. It
integrates four data lanes in each direction with 40 Gbps
bandwidth.one version is Each lane can operate at 10.5Gbps up
to100m using OM3 or 150m using OM4 Multimode fiber,another version
is Each lane can operate at 10.5Gbps up to300m using OM3 or 400m
using OM4 Multimode fiber These modules are designed to operate
over multimode fiber systems using a nominal wavelength of 850nm.
The electrical interface uses a 38 contact edge type connector. The
optical interface uses an 12 fiber MTP (MPO) connector. This module
incorporates proven circuit and VCSEL technology to provide
reliable long life, high performance, and consistent service.
Optical Characteristics (TOP(C) = 0 to 70 ℃, VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | 810 | 850 | 880 | nm | |
| Ave. output power (Enabled) | PAVE | -7.6 | | +2.4 | dBm | |
Difference in launch power between any two lanes (OMA) | DL | | | 4 | dB | |
| Extinction Ratio | ER | 3 | | | dB | |
| Peak power, each lane | PP | | | 4 | dBm | |
| Dispersion penalty, each lane | TDP | | | 3.5 | dB | |
Average launch power of OFF transmitter, each lane | POFF | | | -30 | dB | |
Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3 | SPECIFICATION VALUES 0.23, 0.34, 0.43, 0.27, 0.35, 0.4 | Hit Ratio = 5E-5 |
| Receiver |
| Operating Wavelength | λc | 840 | 850 | 860 | nm | |
| receiver sensitivity in OMA(OLSQ854XM-CDS1) | PSEN | | | -9.5 | dBm | 3 |
| Average Receive Power,each lane | PAVE | -11 | | +2.4 | dBm | |
| Receiver Reflectance | Rrx | | | -12 | dB | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -13 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1.Measured with conformance test signal at TP3 for BER = 1E-12
Receiver Characteristics
More details of our products:
High Reliable Optical Components and Excellent Design
1.DLB laser and PIN photodiode
- Long transmission distance.
- High speed and performance
2.Thick Gold Finger
- Stable operation
- Repeated plug and unplug
3.Plating Hard Gold Shell
- Good heat dissipation
- Can't be deformed easily
- Anti-electromagnetic interference
Cost-effective and Reliable Transmission
- Low power consumption and low latency allow your network devices to
work efficiently
- DOM function supports real-time monitoring for transceiver status.
Comprehensive Performance Test with our Advanced Equipment
- Certified and tested on the automatic quality control system, to
ensure the high performance in the actual working environment.Fully Tested for compatibility in our matched switches.
Our Packing & Labeling:
- Anti-static box
- Individual package
- 10pcs/pallet
- 20pcs/pallet
Our all modules have 3 years warranty!
