Impression Silicone Putty for Equine Hoof Treatment Silicone Putty
60 shore A
Introduction
Silicone Impression Putty is a hydrophilic addition silicone rubber impression material, Silicone Impression Putty contains two components, Part A is platinum catalyst, and Part B is
hydrogen containing polysiloxane. These two-component systems are activated by mixing equal parts
together until a uniform color is achieved at which point the hoof
is packed and a full pad is applied.
Physical Properties:
| Before Curing | Catalyst Components | Base Components |
| Appearance | White putty | Blue putty |
| Mix ratio | 1:1 |
| Pot life | 1-2 minutes |
| Curing time(37C) | <5 minutes |
| After Curing |
| Hardness(Shore A) | 60-65 |
| Permanent deformation % | <0.2% |
| Dimensional stability % | <0.25 |
| Copy details(μm) | <1.5 |
| tensile Strength Mpa | 2.0 |
| Temperature stability | 60°C for 1 week |
| Elongation% | 267 |
Usage Instruction
1. Under the room temperature, take the same amount of base
component (blue) and catalyst component (white).
2. Mix the two components together. It is recommended to use the
blue spoon to take the base component and white spoon to take
catalyst component.
3. Use your fingertips to mix the two components together and knead
for at least 30 seconds until they are mixed completely.
4. Close the lid immediately after usage, the cover can not be
interchanged.
Storage : Silicone impression Putty has a shelf life of 12 month in
original package at a cool dry place.
Package: 350g,500g, 1kg, 5kg, 10kg, 20kg,25kg
