220V High frequency metal electric induction heating welding
brazing machine
1. High Frequency Electric Induction Brazing Machine:
A turning tool is a tool with a cutting part for turning, and it is
one of the most widely used tools in cutting. In order to meet the
requirements of the work, turning tools usually require welding
heat treatment. The most commonly used equipment for turning tool
welding is the high-frequency induction heating machine.
When the high-frequency induction heating machine welds the turning
tool, its inductor is a copying sensor made according to the
turning tool specification, which can ensure the uniformity of the
turning tool welding to a greater extent. What's better is that the
equipment is very simple to operate, and one person can complete it
independently, without the need for multiple people to operate,
which greatly reduces the input of labor costs. The welding speed
is only tens of seconds. Such a fast speed effectively avoids the
occurrence of oxidation and decarburization, and ensures the
welding effect of the turning tool.
2. Technical Parameters of LSW-16 Induction Heating Machine:
| Model | LSW-16 |
| Working Voltage | 220V, 50/60HZ |
| Max input power | 16kw |
| Oscillation frequency | 28-40KHZ |
| Duty cycle | 100% |
| Cooling water flow | 20L/Min,0.15-0.2MPa |
| Weight | 25kg |
| Dimension (L*W*H ) | 420*200*360mm |
| Material | stainless steel |
| Color | support customized |
| Usage | metal heating, brazing,melting etc |
3. Main characteristics of LSW-16 Induction Brazing Machine :
1.Under the same conditions, the effect of high-frequency
power-saving double than traditional tubes.
2.Design with a 100% load, continuously 24 hours a day, can be
equipped with infrared temperature measurement, automatic
temperature control, improve the heating quality and simplify the
manual operation.
3.With over-current, over-voltage, under-water, phase failure, load
discomfort state, the provision of higher reliability and
durability.
4. Induction Brazing Machine Application:
Heat treatment industry
1. a variety of steam, Motorcycle high-frequency hardening heat
treatment, such as: crankshaft, connecting rod, piston pin,
camshaft, valves, various gears within the gearbox, a variety of
fork, all kinds of spline shaft, drive axle, various small shaft
crank pin, a variety of rocker, rocker shaft, high-frequency
hardening heat treatment.
2. the hardware high-frequency hardening heat treatment, such as
pliers, hammers, strong pliers, wrenches.
3. hydraulic components such as: piston pump plunger, rotor pump
rotor, conversion shaft of the valves, gear of gear pump high
frequency quenching.
4. various electric tools gear shaft of the high-frequency
hardening heat treatment.
5, a variety of carpentry tools, such as: axes, planing and other
heat treatment.
Forging industry
1. plate heating, bending and forming.
2. standard parts, fasteners through the hot forming.
3. the hardware tools through heat, such as pliers, wrenches and
other heat through hot forming.
4. taper shank drill rod extrusion prospecting.
5. the pipe through the hot forming, such as bends and so on.
Brazing
1. carbide cutting tools welding. Such as turning, milling, cutter
knife.
2. the diamond saw blade welding. Such as diamond saw blade,
abrasive, jagged welding. Exploration drill bit used in welding,
such as word drill, drill welding horns.
3. brass, copper
Smelting
Steel,iron, non-ferrous metals,graphite crucible smelting
5. performance and characteristics of induction heating brazing
machine:
1.Using imported Fuji power components and high-quality components
to ensure high-quality equipment quality
2. Small body weight, high efficiency and energy saving
3. Overcurrent, overvoltage, under water, overheat protection
circuit
4. Exquisite design, 304 stainless steel screws, 304 stainless
steel handlebars, no paint stripping, stripping phenomenon.
