Roll Wrapped 100% 3K Carbon Fiber Tube Twill Weave Ultra Light Weight

Ultra Light Weight Roll Wrapped 100% 3K Carbon Fiber Tube - Twill Weave

Carbon fiber tubes are made with a high-strength plastic composite that’s both stiff and lightweight. They conduct heat and electricity and offer excellent machinability. They are commonly used in applications that require high strength-to-weight and high stiffness-to-weight applications in aerospace, military structures, robotics, and manufacturing fixtures and sports equipment.

Ultra lightweight carbon fibre tubes with a twill fabric top layer and a UV protective high gloss coating. This product is characterized by a wall thickness of 0,5mm. Very suitable for super lightweight construction with good stiffness and reasonable strength.

These woven carbon fiber tubes, also known as CF or graphite fiber, provide high stiffness, high tensile strength, low weight, high chemical resistance, high-temperature tolerance, and low thermal expansion. They are commonly used when building frames and structures, and are also used for sporting equipment, automobiles, bicycles, and boats.

Advantages

1. Excellent physical and chemical properties: The density of carbon fiber is less than 1/4 of that of steel, generally in the range of 1.5-2.0 g/cm³, and its tensile strength is 7-9 times that of steel, which can reach 1-7 GPa. Generally, the modulus of carbon fiber is more than three times that of traditional glass fiber, and the modulus of high modulus carbon fiber can be as high as 700GPa. Moreover, carbon fiber has both the flexibility and processability of textile fiber.
2. Abrasion resistance: There is very little wear when carbon fiber and metal are paired. Carbon fiber is usually used instead of asbestos to make advanced friction materials.
3. Good thermal conductivity: Generally, the thermal conductivity of inorganic and organic materials is poor, but the thermal conductivity of carbon fiber is close to that of steel. Using this advantage, it can be used as a material for solar heat collectors and a heat-conducting shell material with uniform heat transfer.

Carbon Fiber Tube - Manufacturers, Suppliers, Factory

Our pursuit and company goal is to "Always satisfy our customer requirements". We continue to develop and design superior quality products for both our old and new customers and achieve a win-win prospect for our clients as well as us for. We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits. The product will supply to all over the world, such as Europe, America, Australia, Netherlands, Kyrgyzstan, and Zambia, Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, please click the button to acquire additional information.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.