Multi-Station Fully Automatic Blister Forming Machine Fruit Box
1. Fully servo driven machine.no noise.no vibration,thermoforming
good and fast.
2. Fully machine in compact structure,taking small floor space;
3. Can be adapted to a variety of materials,and the products
thicker 8% than the average machine products.
4. Furnaces automatic removal device,can be turned down at any time
during production without breaking the sheet.reaching without
wasting materials;
5. Electric furnace temperature control system uses intelligent
automatic compensation control,a control,a control of a
regulator,easy to adjust the temperature uniformity,easy to
use,simple,fast heating,low temperature three times up and down the
oven roast slices.
| pecifications: |
| Forming area: | 710*850*120mm(W*L*H) |
| Forming speed: | 12-20 stroke/minute |
| Machine size: | 9800 × 2300 × 2400mm(L*W*H) |
| Heat Furnace size: | 7800 × 2600mm(top+bottom) |
| Configuration: |
| Pulling: | Delta servo driver |
| Temp: | Delta temperature controlling moduls |
| Oil pump: | Germany Rexroth |
| Oil valve: | Germany Rexroth |
| Circuit: | Japan Fuji |
6. Forming,cutting die servo-driven,two-way adjustable for upper
and lower mold stroke,in which the upper mold electric adjustable
in clamping direction. The upper and bwer molds height position can
be adjusted conveniently and fast under the clamping state;lower
mold in clamping direction readily accessible buffer,increasing the
clamping speed,avoiding shock.
7. Auto cutting,auto counting,auto transmission by PLC.
8. Labor saving,only 1-2 workers packing.
