Upper Alarm Empty Alarm Insertion Electromagnetic Flow Meter
Insertion Electromagnetic Flow Meter Discription
NYLD-CR insertion electromagnetic flow meter is a new type of flow
meter developed on the basis of pipeline electromagnetic flow
meter. On the basis of retaining the advantages of pipeline
electromagnetic flow meter, it is installed on pipeline for
pipeline electromagnetic flow meter. Difficulty, high cost and
other defects, according to the principle of NIKURADS, the volume
flow of the fluid is obtained by measuring the average flow rate of
the fluid by electromagnetic method. Especially after adopting the
technology of press-opening and press-installation, the plug-in
electromagnetic flow meter can be installed without stopping the
water, and it can also be installed on cast iron pipes and cement
pipes. The successful development of the plug-in electromagnetic
flow meter provides a new method for the detection of fluid flow.
Insertion Electromagnetic Flow Meter Design Feature
◎In the pipeline flow detection, the installation is simple, the
flow can be continuous, and the holes can be opened under pressure
on site, which has absolute installation advantages and price
advantages.
◎It is suitable for flow detection of liquids with conductivity
above 20µs/cm, such as water, sewage, acid, strong alkali, etc. The
change of conductivity does not affect the performance change.
Strongly adapt to complex changes in fluid, especially suitable for
flow measurement of water supply and drainage pipelines
◎The mechanical movable parts of the flow meter, the converter
adopts an optimized design, the structure is compact, and it is
easy to install. The converter and the sensor are interchangeable,
and the detection range of the flow measurement can be freely
changed (0.5m/s~10m/s).
◎It is only related to the insertion depth, so it has wide
versatility and strong interchangeability. One model can be applied
to the fluid measurement requirements of various sizes of
pipelines. Range automatic switching function. When the flow meter
changes in the flow range, the range can be automatically switched
to ensure accurate measurement within the full range.
Insertion Electromagnetic Flow Meter Technical Parameter
| Typical application | Liquid flow measurement |
| Measuring range | Custom design |
| Pipe diameter | 300-3000mm |
| Velocity range | 0.1~10m/s |
| Accuracy | 0. 5 ~ 10 m / s: ±1.5% FS;0.1 ~ 0.5 m / s; ±2.0% FS |
| Conductivity | >50µs/cm |
| straight pipe | Front 5DN, Rear 3DN |
| Medium temperature | -20℃~/+130℃ |
| Ambient temperature | -20℃~/+60℃ |
| Environment humidity | 5~100%RH (relative humidity) |
