Metallurgy Machine Rotary Cooler Rotary Drum M-1105 Pabrik 7 Full
Set
1. Introduction of rotary cooler metallurgy machine
Cooler: Alias drum cooler, used in the production of compound
fertilizer, cooling fertilizer with certain temperature and
particle size, and matching with dryer. It can greatly improve
cooling speed, reduce labor intensity and increase output. Further
removal of some water and reduction of grain temperature of
compound fertilizer. It can also be used for cooling other powdery
and granular materials.
2. Cooler classification metallurgy machine
(1) Types of industrial coolers: single-barrel cooler,
double-barrel cooler, grate cooler, clinker cooler, etc.
(2) Single-barrel cooler: Single-barrel cooler is suitable for
cooling clinker from rotary kiln, at the same time, it can absorb a
large amount of heat energy edge air carried by high-temperature
materials, so as to preheat the combustion-supporting air into the
kiln to high temperature, so as to strengthen calcination and
reduce heat consumption. It is an important supporting equipment of
rotary kiln.
(3) The clinker cooler is an important supporting equipment of
cement rotary kiln. Without the corresponding efficient cooler,
there can be no efficient rotary kiln.
(4) Grate cooler is a kind of cooling equipment which collects and
cools clinker moving on the bed with certain pressure air in the
direction of vertical movement.
(5) Lime cooler: Vertical cooler is one of the main machines of
active lime.
Activated lime generated after calcination in rotary kiln flows
into vertical cooler with refractory materials sequentially. The
cross section of the cooler is square, in which the central cold
air cap and the chamber cold air cap are evenly distributed. The
air cap is connected with an external fan by a pipeline. At the
bottom of the cooler, there is a discharge orifice, and each
discharge orifice is provided. There is a motor vibration unloader
under the mouth. Material accumulates and covers the hood in the
cooler, and forms a certain thickness of the material layer. The
cooling air is blown in by an external fan and enters the hood
through the air chamber. The material cooled by air is gradually
eliminated under the action of motor vibration unloader. The air
heated by the material enters the rotary kiln directly from the
hood of the kiln head and participates in combustion as secondary
air.
3. Function of Cooler metallurgy machine
In the cement production process, most raw materials are crushed,
such as limestone, clay, iron ore and coal. Finally, high
temperature clinker discharged from rotary kiln is cooled by cement
clinker cooler to downstream transportation, storage and cement
grinding.
4.Metallurgy Machine Rotary Cooler Rotary Drum M-1105 Pabrik 7 Full
Set Data Table
| No. | Name | Model | Materials |
| 1 | Sheel rotary | PL-18 | SS400 |
| 2 | Sheel rotary | PL-30 | SS400 |
| 3 | Tyre ring | OD.3152xID.2926x250THK. | SS400 |
| 4 | Flange | PL-46 | SS400 |
| 5 | Baseplate tyre | PL-30x600x200 | SS400 |
| 6 | Guide tyre plate | PL-30x90x90 | SS400 |
| 7 | Baseplate bullgear | PL-30x250x250 | SS400 |
| 8 | End cover plate | PL-18 | SS400 |
| 9 | Guide plate | PL-30x250x1140 | SS400 |
| No. | Name | Model | Materials |
| T1 | Blade | PL-10 | SS400 |
| T2 | Blade | PL-10 | SS400 |
| T3 | Blade | PL-10 | SS400 |
| T4 | Blade | PL-10 | SS400 |
| T5 | Blade | PL-10 | SS400 |
