AIRSUSTECH Air Spring Balloons 230116-1 One Convoluted Rubber
Bellows Without Flang
Specifications and Detailed Technical Parameters: 230116-1
| Loading capacity max. 1 Load capacity max. (7 bar) | 23.75 kN |
| Max. Lifting pressure 1 Max. Pressure for lifting processes | 8.0 bar |
| Diameter max. 1 diameter max. | 305 mm |
| Required space 1 space requirement Ø | 335 mm |
| Height max.1 Max. Height | 175 mm |
| Height min. 1 min. Height | 55 mm |
| Weight 1 weight | 1.03 kg |
| Force to collapse to min. height 1 restoring force to the minimum
height |
❶Nut / Blind Nut
The Long Of The Nut:25 mm
Top Cover Plate Screw number: 8 pcs
Bottom Cover Plate Screw number : 8 pcs
Top Cover Plate Screw (Nut) Tooth : M10
Screw Center Distance of Top Cover Plate :
Bottom Cover Plate Screw (Nut) Tooth : M10
Screw Center Distance of Bottom Cover Plate :
❷ Gas Hole / Air inlet / Air Fitting
Gas Hole / Air inlet : G1/2
❸ Cover Plate
Top Diameter: 172 mm
Bottom Cover Plate Diameter: 172 mm
❹Rubber Bellows
Rubber Bellows Natural Diameter : 150 mm
Rubber Bellows Natural Height :115 mm
❺ Bumper block / Buffer block
Without Bumper Block
❻ Girdle Hoop / Girdle Ring
Without Girdle Hoop
The related picture of 230116-1
Working circuit principle of rubber air spring
When the rubber air spring works, when the inner wall is filled
with air compression, an air compression column is generated. The
reasonable bearing area of the air compression column increases,
which indicates that the bearing capacity of the torsion spring
increases. Accompanied by the shock load vibration load ascension
will occur torsional spring the relative height of reduce at the
same time the lining of capacity and bending stiffness of torsional
spring ascends the lining are reduced greatly, the relative height
of torsional spring up around the internal capacity expansion,
bending stiffness of the torsional spring to reduce the lining of
the air column reasonable bearing area reduced, so the torsional
spring bearing capacity to reduce.
In that way, the air spring in a reasonable travel arrangement, the
relative height of the air spring, the inner wall capacity, bearing
capacity with the growth and reduction of vibration load has a
stable rigid transmission, amplitude and vibration load
manipulation. It can also adjust the size of the bending stiffness
and bearing capacity of the torsion spring by increasing or
decreasing the air flow, or complete automatic control and
adjustment of the auxiliary brake air chamber. Therefore: AW=F/P
AW--- rubber air spring reasonable total area (mm2) F - rubber air
spring load (kN) P - rubber air spring gas pressure (MPa)
FAQ:
Q1. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We
can build the molds and fixtures.
Q2. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
the customers have to pay the sample cost and the courier cost.
Q3: How about the quality of your product?
A: Our products are certified to ISO/TS16949:2009 international quality standards. We have very strict Quality
Control Systems.
