Automatic Bottle Spray Trigger Nozzle Capper Capping Machine
Features
1. Bottle volume: 100ml-1,500ml
2. Speed: 20-100bpm (can be customized based on specific
requirements)
3. Bottles suitable: cylinder, flat and irregular shapes
4. Caps suitable: lotion pump, flip-top, pull-push, Yorker,
disc-top etc.
5. Siemens system
6. Gentle operation, no scratch and injury to caps and containers
7. Quick changeovers
8. Module structure, easy maintenance
9. Easy connected to filling machine and labeling machine
10. Low running noise
Bottle-feeding by screw
The bottle-in screw is processed by contour design, with precise
and fast bottle feeding, no damage to bottle.
Capping head
wheel design, make non-relative motion between wheels and caps;
high-precious torque control system, a stable and reasonable torque
value
Tube fixing by cylinder
The capping head takes caps, while the tube-fixing cylinder is
stuck on the upper end of the tube near the piston where the cap is
straight here. With the capping head lifting, the tube is
straightened and run to 5-10mm above the bottle mouth, to make sure
the tube is inserted into bottle correctly.
Tool-free changeover
For different specifications of products, it adopts quick-release
design, including the bottle-in star wheel, bottle-out star wheel,
bottle-taking star wheel, bottle in-and-out guide plate, and outer
retaining ring. The templates are color-coded to distinguish
between different specifications.
Rejecting of unqualified product
A double-conveyor belt structure with an intelligent detection
sensor at the exit. The qualified bottles are normally conveyed,
and the unqualified (no inner tube and no cap) bottles are
automatically diverted to another conveyor belt by using a swing
cylinder. When bottle block appears, the capping machine will
automatically stop and it will start again when the problem solved.
