15-5 PH Alloy Steel Plates UNS S15500 Alloy XM-12 Steel
Description
15-5 PH Alloy Steel Plates UNS S15500 Alloy XM-12 Steel is a
precipitation-hardening stainless steel formulated for primary
forming into wrought products.
All of 15-5 PH Alloy Steel Plates UNS S15500 Alloy XM-12 Steel conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,15-5 PH Alloy Steel Plates UNS S15500 Alloy XM-12 Steel
- Length: Fixed length or random length or based on the customer's
special requirement
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X
L1000-12000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in
coil form)
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 -
2000mm
Products Details
15-5 PH Alloy Steel Plates UNS S15500 Alloy XM-12 Steel
| Chemical Composition (weight%): | C (％): ≤ 0.07
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 14.0 ~ 15.5
Ni (％): 3.50 ~ 5.50
Mo (％): -
Cu (％): 2.50 ~ 4.50
Nb+Ta (%): 0.15 ~ 0.45 |
Mechanical Properties Under
Final Heat Treatment: | Solution treatment temperature and cooling ways: 1038 +/-15℃
Steel plate thickness /mm: 0.038 ~ 101.6
Tensile strength, σb≥/MPa: -
Yield strength, σ0.2≥/MPa: -
Elongation, δ≥(％): -
Hardness ≤|HRC: 38
Hardness ≤|HBS: 363 |
Applications:
15-5 PH Alloy Steel Plates UNS S15500 Alloy XM-12 Steel used most
often in the Marine gas turbine compressor sections, Hallow shafts,
Paper mill equipment, Engine parts, Aircraft components, Gears,
Fittings and fasteners, Nuclear reactor components,
15-5 PH Alloy Steel Plates UNS S15500 Alloy XM-12 Steel
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of Inconel alloy 15-5 PH Alloy Steel Plates UNS S15500 Alloy XM-12 Steel and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, bending, set
length, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
Packing method
Wooden Pallet BOX,Standard Seaworthy Package,based on the
customer's special requirement,etc
