Corrugated Sheet Making Electric Shaftless Mill Roll Stand
Structural Features
● Symmetrical structure can also install two bundles of paper at
the same time, Paper can be used for non-stop for a job; Adopts
mechanical drive to complete the paper clamping, lifting, loosen,
move on, around translational motion, etc.
● Each shaftless mill roll stand is equipped with two pieces of
paper guide, two set of paper car; paper guide the use of channel
14 and the guide post weld, paper car adopt 10mmwelded stell, the
length of track is 4500mm.
● Manual dics brake, add screw following.
● Electric elements centralized control the electric elements,
expand chuck.
Technical parameter:
1,Backstands action mode:mechanical electric operation
2,the range of paper jams:maximum:1400mm minimum:600mm
3,the diameter of paper jams:maximum:￠1400mm minimum:￠400mm
4,Unilateral maximum load:maximum2000Kg
5,Powered motor parameters:
①Paper jams motor550W×4set 380V 50HZ short(S2)working standard
②lift motor 1.5Kw 380V 50HZ short(S2)working standard
Mainly purchased parts, raw materials and origin:
| Name of main parts | Brands or place of origin | material |
| motor | Hebei Hengshui | |
| reducer | Shandong Dezhou Jin bu huan | |
| contacts | Chint or De li xi | |
| chuck | Xusheng | 3 inches, 4 inches shared |
| wallboard | Production own | HT200 |
