Electrodeposited 0.1mm Copper Shielding Foil For Mri Room

Electrolytic 0.1mm 1320mm Copper Foil Shielding Sheet For RF Cage

Description:

Thin copper foils are either produced by electrodeposition or rolling. For electrodeposition high grade copper has to be dissolved in an acid to produce a copper electrolyte. This electrolyte solution is pumped into partially immersed, rotating drums which are electrically charged. On these drums a thin film of copper is electrodeposited. This process is also known as plating.

In an electrodeposited copper manufacturing process, the copper foil is deposited on a titanium rotating drum from a copper solution where it is connected to a DC voltage source. The cathode is attached to the drum and the anode is submerged in the copper electrolyte solution. When an electric field is applied, copper is deposited on the drum as it rotates at a very slow pace. The copper surface on the drum side is smooth while the opposite side is rough. The slower the drum speed, the thicker the copper gets and vice versa. The copper is attracted and accumulated on the cathode surface of the titanium drum. The matte and drum side of the copper foil go through different treatment cycles so that the copper could be suitable for PCB fabrication. The treatments enhance adhesion between the copper and dielectric interlayer during copper clad lamination process. Another advantage of the treatments is to act as anti-tarnish agents by slowing down oxidation of copper.

Copper is a great material of shielded signal. Widely used for rf cage /MRI room installations, building roof to protect out of oxidization.

There are two main installation ways of RF cage building.

First option :

ED copper foil 1320mm -basic step- Make Wooden Panel +Put copper foil Covered wooden frame +assemle copper foil wooden panel together.

Second option :

RA copper foil 600mm- basic step - Make bending edges of copper sheet + Fix sheets on wood walls + welding edges of 2 pcs sheets together.

Application

ED Shielding Copper Foil is pretty popular in rf cage installation, because of its super width 1320mm,

engineers can make wider copper panels and less copper panels connections can make less gaps between two panels.

It will have better shielding frequency than more gaps rf cage.

After-Service:

1. Delivery within 10 days after receiving payments.
2. Offer Different Shipping Ways to our customers.
3. Track the order until you get the products
4. In usual, sea port we used is in Tianjin, Shenzhen...
5. Shaped in roll or sheet, and packed in wooden case.

Jovvi(Beijing Hengtai Tech Co., Ltd) was established in 2010. The company adheres to the development concept of “integrity all over the world and conducts all continents”, adheres to the business policy of “strive to create greater value for customers”,  and is committed to providing , MR shielding and CT protection ,PET-CT, SPECT Nuclear Medicine sector.. For the nuclear medical field, our JOVI aims to designs and builds systems and equipment for the safe treatment of radioactive substances used in Nuclear Medicine, guaranteeing minimum exposure to the operator, total decontamination and inalterability in any working condition.  By 2025, our Jovi have been used in more than 90 countries and regions around the world, and established long-term and stable cooperative relationships with customers. We are a dynamic and innovative system working in synergy to satisfy market needs with a wide range of action. Being constantly ready to anticipate customer needs with innovative solutions and cutting edge technologies has made us a competent and reliable reference point.  In the future, we will actively participate in innovation and change in the industry, work with partners to promote the development of the field of medical shielding, protection and nuclear medicine, continuously improve and improve our service system, and continue to contribute to the medical cause of all mankind.