Roll Of Copper Foil Shielding Tape 0.1mm Rf Cage Building Roof
Description:
The matte and drum side of the copper foil go through different
treatment cycles so that the copper could be suitable for PCB
fabrication. The treatments enhance adhesion between the copper and
dielectric interlayer during copper clad lamination process.
Another advantage of the treatments is to act as anti-tarnish
agents by slowing down oxidation of copper.
Copper is a great material of shielded signal. Widely used for rf
cage /MRI room installations, building roof to protect out of
oxidization.
There are two main installation ways of RF cage building.
First option :
ED copper foil 1320mm -basic step- Make Wooden Panel +Put copper
foil Covered wooden frame +assemle copper foil wooden panel
together.
Second option :
RA copper foil 600mm- basic step - Make bending edges of copper
sheet + Fix sheets on wood walls + welding edges of 2 pcs sheets
together.
| Qualtiy Items | General Technical Terms |
| Normal thickness | 2oz | 3oz | 4oz | 5oz |
| 0. 07mm | 0. 105mm | 0. 14mm | 0. 175mm |
| Area Weight(g/ m2) | 560-610 | 838-960 | 1100-1280 | 1380-1600 |
| Tensile strength | Room temperature | ≥ 28 | ≥ 28 | ≥ 28 | ≥ 28 |
| ( kg/ mm2) |
| Elongation | Room temperature | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 10 |
| % |
| Leakage points( points/ m2) | No |
| High temperature Anti-Oxidization Performance( 180℃/ h) | No Oxidization |
| Width Tolerance | ( + 2. 0 , - 2. 0) |
Application
ED Shielding Copper Foil is pretty popular in rf cage installation,
because of its super width 1320mm,
engineers can make wider copper panels and less copper panels
connections can make less gaps between two panels.
It will have better shielding frequency than more gaps rf cage.
After-Service:
1. Delivery within 10 days after receiving payments.
2. Offer Different Shipping Ways to our customers.
3. Track the order until you get the products
4. In usual, sea port we used is in Tianjin, Shenzhen...
5. Shaped in roll or sheet, and packed in wooden case.
