Product details
1. IP Rank: IP68 waterproof.
2. Private Mode products, support ODM&OEM.
3. LED Color: Pure White: 6500±10% Warm White:3000K±10% costomized.
4. outdoor inground led lights use SS316L material, super good
anti-corrosion.
5. Grounding fixing method default: aluminum grounding pole
(plastic grounding pole optional).
Specification
| HG-UL-3W-SMD-G |
| Lamp parameter | Material | SS316L body+tempered glass cover+VDE rubber cable |
| length | Φ98×88mm |
| Input voltage | DC24V |
| Constant Driver | yes |
| Over-current Protection | yes |
| Wattage | 3W±1W CREE |
| Light lumen | 300LM±10％ |
| Beam angle | Beam angle:15°/30°/45°/60° |
| CCT | Pure White: 6500±10% Warm White:3000K±10% costomized |
| Specifics | Operating Temperature (℃) | -20~40℃ |
| IP Rating | IP68 |
| Certificate | CE, RoHS,FCC,IP68,IK10 |
| Life-span | 50,000 hours |
| Warranty | 2Years |
| Test position | LED Grond light (Min) |
| Working temperature 28℃ | Working temperature 40℃ |
| land test(Min) | 480 | 480 |
| LED edge temperature(℃) | 60 | 72 |
Product Size
Advantage
1. Reliable quality with 100% 10m depth waterproof test.
2. 3w led ground lightmust be 8 hours aging test and provide 2
Years warranty.
3. Outdoor ground light IP68 Finished products all passed 30 steps
quality inspection.
4. Thickened aluminum board :2-3mm,better heat dissipation with the
conductivity :2.0W/(m.k),
5. Good looking stamping SS316 rivet screws,more stable ,never fall
off.
LED Ground light all passed 30 steps quality control , 100%
waterproof at 10m depth ,8 hours LED agening test,
100% inspection before deliver.
Application
IP68 Led Ground light Widely used as garden, community, lawn, park
and other landscape lighting.
Some tips for you
Q1:How to choose the right LED energy saving lamps?
A:Low watage with high Lumen. This will save more electricity bill.
Q2: What is the advantages of LED?
A:Environmental friendly, Energy saving and Long lifespan.
Q3: The key factor that influence LED lifespan.
A:Temperature: It requires that junction temperature of LED chip
should be ≤120℃, so the center temperature at the LED bottom of
light board should be ≤ 80 ℃.
