CE Approved Speed Rotary Cone High Quality Double Conical Revolving
Vacuum Dryer
Product Description
Confined to the surface of thermal-energy (such as hot water or low
pressure steam the HTF), the heat was passed in the shell dry
materials.
In the drive, as slowly rotating the tank, the tank materials
continuously mixed, so as to achieve the purpose of strengthening
drying.
Materials in a vacuum, steam decline in the material surface water
(solvent) reached saturation point and evaporation, and the vacuum
pump from the timely recovery. Materials internal water (solvent)
continuously to the surface infiltration, evaporation from the
three ongoing process, the material in a very short time to dry
purpose.
Apply chemical, pharmaceutical, food and other industries powdery,
granular and fiber concentration, mixing, drying and
low-temperature drying of materials needed (such as biochemical
products more easily applied to oxidation, volatile,
thermosensitive, strong stimulation, toxic materials, and not allow
the destruction of crystalline materials dry.
Principle
As a specialized company in drying industry, we supply hundred sets
to the customers every year. As for working medium, it may be
thermal oil or steam or hot water. For drying the adhesive raw
material, we have designed specially a stirring plate buffer for
you. The biggest may be 8000L. Let heat source (for example, low
pressure steam or thermal oil) pass through the sealed jacket. The
heat will be transmitted to raw material to be dried through inner
shell;Under driving of power, the tank is rotated slowly and the
raw material inside it is mixed continuously. The purpose of
reinforced drying can be realized; The raw material is under
vacuum. The drop of steam pressure makes the moisture (solvent) at
the surface of raw material reach the state of saturation and
evaporate. The solvent will be discharged through vacuum pump and
recovered in time. The inner moisture (solvent) of raw material
will infiltrate, evaporate and discharge continuously. The three
processes are carried out unceasingly and the purpose of drying can
berealized within a short time.
Technical parameters
| Name | unit | 100 | 200 | 350 | 500 | 1000 | 2000 | 3000 | 4000 | 5000 |
| Total volume | L | 100 | 200 | 350 | 500 | 1000 | 2000 | 3000 | 4000 | 5000 |
| working volume | L | 50 | 100 | 175 | 250 | 500 | 1000 | 1500 | 2000 | 2500 |
| heating area | ㎡ | 1.16 | 1.5 | 2 | 2.63 | 4.61 | 7.5 | 10.2 | 12.1 | 14.1 |
| speed | rmp | 6 | 6 | 6 | 6 | 6 | 5 | 4 | 4 | 4 |
| power | kw | 0.75 | 1.1 | 1.5 | 1.5 | 3 | 4 | 5.5 | 7.5 | 7.5 |
| rotating height | mm | 1810 | 1910 | 2090 | 2195 | 2665 | 3055 | 3530 | 3800 | 4180 |
| total weight | kg | 825 | 1050 | 1350 | 1650 | 2070 | 3000 | 4500 | 5350 | 6000 |
Features
1.When oil is used to heat, use automatic constant temperature
control. It can be used for drying biology products and mine. Its
temperature of operation can be adjusted form 20-160 ℃ .
2.Compared to ordinal dryer, its heat efficiency will be 2 times
higher.
The heat is indirect. So the raw material can not be polluted. It
is in conformity with the requirement of GMP. It is easy in washing
and maintenance.
Pre-service:
As a good and rich experience supplier, we should offer customer
the best quality and best price of the machine.
1. Introduce the suitable product to the customer in detail, answer
the question raised by customer carefully.
2. Make the suitabe project as the customer requirement and make
sure the machine is suitable for the material.
Sale service:
(1). Ensure product with high quality and pre-commissioning before
delivery. (2). Delivery on time. (3). Provide full set of documents as customer’s requirements.
After-sale service:
Provide considerate services to minimize clients’ worries.
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.
Service commitment:
1. Provide clients one-year warranty to make sure the machine work
well.
2. We always keep certain inventory level of spare parts, which
means the replacements can be sent to you timely.
3. Send every client a preferential quotation.
