Blades for Komatsu D31s Bulldozers
Basic Info.
Model NO.
D31S-16 D31S-17 D31S-18
Manufacturer
A&S Machinery Co., Ltd.
Transport Package
Wooden Pallet
Specification
standard or as requested
Product Description
Blades/Cutting Edges for the following KOMATSU D31S Bulldozers are
offered here.
D31S-16
D31S-17
D31S-18
Komatsu Cutting Edge 12F-70-11640 Komatsu Blade Parts Cutting Edge
Komatsu D31 Bulldozer
Komatsu Cutting Edge 11G-71-21170 Komatsu Blade Parts Cutting Edge
Komatsu D31 Bulldozer
Blade/Cutting Edge Types available for KOMATSU D31S Bulldozer
Weld-on type
Bolt-on type
Standard type
Improved type
Customized type
Features:
Cutting edges/blades/end bits for KOMATSU D31S bulldozers are made
from HARDOX plate or other high quality wear plates with refined
casting and hardening technology.
The wear life of our cutting edges/blades/end bits, is about 2-3
times longer compared to the common ones, so the down-time of the
machines will be highly reduced and much maintainence cost will be
saved and finally the efficiency of your bulldozers will be
increased.
Blades/cutting edges for Komatsu and SHANTUI bulldozers are also
supplied here.
Spare Parts Available for KOMATSU D31S bulldozers include:
Wear parts (cutting edges, end bits, side cutters, wear strips,
ripper tooth, ripper assembly)
Undercarriage parts (track shoes, track chains, idlers, rollers,
carrier rollers, driving sprocket, track links, bolts)
Transmission parts(travel motors, pins and bushings, gear boxes)
Hydraulic parts( engine overhaul repair kit, pumps, valves, starter
motors, cylinders, filters, mufflers, radiators)
Electrical parts(sensors, solenoid valves, alternators, control
panels, switches, head lights)
Any further interest in our blades/cutting edges/end bits for
KOMATSU D31S bulldozers, please contact for more.
| Typical Technical Specifications of A&S Blades for Bulldozers |
| 1. Chemical Components: Carbon(0.81) Silicon(0.23) Manganese(0.62)
Phosphorus(0.019) Sulfur(0.031) Chrome(0.009) Molybdenum(0.005)
Nickel(0.004) Copper(0.084) Tin(0.03) |
| 2. Hardness: surface270-300HB, center275HB |
| 3. Tensile strength: 100KGF/MM2 |
| Note: those figures are just for your reference only, to get the
specific figures for your requested blades, please contact our
sales rep. . Thanks. |
