DIN EN C35 Structural Steel Plates W-Nr 1.0501 Shot Blasted
Description
DIN EN C35 Structural Steel Plates W-Nr 1.0501 Shot Blasted is
Carbon steel, medium carbon steel.This steel grade has similar
properties as the DIN CK35.
All of DIN EN C35 Structural Steel Plates W-Nr 1.0501 Shot Blasted conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,DIN EN C35 Structural Steel Plates W-Nr 1.0501 Shot Blasted
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X
L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 -
2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in
coil form)
Products Details
DIN EN C35 Structural Steel Plates W-Nr 1.0501 Shot Blasted
| Chemical Composition (weight%): | C(％): 0.32～0.39
Si(％): ≤0.40
Mn(％): 0.50～0.80
P(％)≤: 0.045
S(％)≤: 0.045
Cr(％): ≤0.40
Mo(％): ≤0.10
Ni(％): ≤0.40 Other: Cr+Mo+Ni≤ 0.63％ |
Mechanical Properties Under
Final Heat Treatment: | Tensile strength / σb/MPa|≥: 630~780
Yield strength / σs/MPa|≥: 430
Elongation / 5(％)|≥: 17
AKV ( DVM-V ) ≥/J: - |
Applications:
DIN EN C35 Structural Steel Plates W-Nr 1.0501 Shot Blasted
Applications include levers, bolts, studs, nuts, and similar parts
which are headed, upset, orextruded.Applications for wires include
nails requiring high shank rigidity or strength andquench-hardened
nails.
Equivalent Grade:
DIN EN C35
W-Nr 1.0501
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of DIN EN C35 Structural Steel Plates W-Nr 1.0501 Shot Blasted and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, bending, set
length, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1000 KG. However, if you want to place an
order as the start of our cooperation, we can accept smaller
quantities at the first time. Of course, after the start, we will
have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
