DIN EN C22 Structural Steel Flat Bar 1.0402 Hot Rolled Forged
Description
DIN EN C22 Structural Steel Flat Bar 1.0402 Hot Rolled is one of
the very commonly used plain carbon steels. It has a nominal carbon
content of 0.22% with approximately 0.55% manganese. It is a good
combination of strength and ductility and may be hardened or
carburized.
All of DIN EN C22 Structural Steel Flat Bar 1.0402 Hot Rolled conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal, DIN EN C22 Structural Steel Flat Bar 1.0402 Hot Rolled
- Shape:Structural Steel Flat Bar
Forging piece: stepped shafts with flanks / discs /tubes /slugs
/donuts /cubes /other different shapes based on OEM.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X
L1000-12000mm
- Length: Fixed length or random length or based on the customer's
special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Products Details
DIN EN C22 Structural Steel Flat Bar 1.0402 Hot Rolled
| Chemical Composition (weight%): | C (％): ≤ 0.030 |
| Si (％): ≤ 1.00 |
| Mn (％): ≤ 2.00 |
| P (％): ≤0.045 |
| S (％): ≤0.030 |
| Cr (％): 17.0～19.0 |
| Ni (％): 8.50~11.5 |
| N (%): 0.12~0.22 |
Mechanical Properties Under
Final Heat Treatment: | Condition: solution treated |
| Heat treatment temperature /℃: 1010~1150 |
| Medium: rapid cooling |
| σb/≥ MPa: 550 |
| σ0.2/≥ MPa: 245 |
| δ ≥(％): 40 |
| ф ≥ (％): 50 |
| Hardness | HB ≤: 187 |
Applications:
DIN EN C22 Structural Steel Flat Bar 1.0402 Hot Rolled used most
often in the Pulp mill bleach systems, Seawater handling equipments
Oil and gas production equipments,etc
DIN EN C22 Structural Steel Flat Bar 1.0402 Hot Rolled
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of DIN EN C22 Structural Steel Flat Bar 1.0402 Hot Rolled and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, bending, set
length, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
Packing method
Wooden Pallet BOX,Standard Seaworthy Package,based on the
customer's special requirement,etc
