| Model | GSKA-100 | GSKA-150 | GSKA-200 | GSKA-400 | GSKA-800 | GSKA-1000 |
| Inner chamber size W×H×D(cm) | 50×50×40 | 50×60×50 | 60×75×50 | 80×85×60 | 100×100×80 | 100×100×100 |
| Exterior chamber size W×H×D(cm) | 78×157×105 | 78×167×115 | 88×185×115 | 108×195×125 | 128×210×145 | 128×210×165 |
| Testing temperature range | 0ºC,-20ºC,-40ºC,-70ºC~150ºC |
| Testing humidity range | 20%RH~98%RH |
| Temp.humi.fluctuation | ±0.3ºC;±0.5%RH |
| Temp.humi.uniformity | ±2ºC;±3% empty loading after stablize for 30mins ±2ºC;±3%RH |
| Temp.humi.resolution | 0.01ºC;0.1%RH |
| Heating&cooling time ºC/min | Heat-up:3ºC/min(average),cool-down:1ºC/min(average) |
| Exterior chamber material | Cold rolled plate + Powder coating |
| Interior chamber material | SUS#304 Stainless steel |
| Insulation material | Rigid Polyurethane foam |
| Circulation system | Centrifugal fan air circulation system |
| Heating system | SUS# Stainless steel high-speed heater |
| Humidification system | Electrothermal steam humidification |
| Dehumidifying | ADP critical dew point cooling / dehumidifying method |
| Refrigeration system | Finned evaporator + Air(Water) cooling condenser |
| Controlling system | Touch screen controller |
| Other components | Vacuum glass observation window |
| Test hole(100mm) |
| Controller status indicator |
| View light |
| Compartment shelf (2 freely adjustable) |
| Safety protection device | Overheat protection circuit breaker |
| Humidification system overheat protection |
| Compressor overload protection |
| Control system overload protection |
| overload indicator |
| Phase sequence protection |
| Water shortage protection |
| High voltage and low voltage protection |
| Over temperature protection |
| Water supply delay protection |
| Fan overcurrent protection |
| Power supply | AC 1ψ220V;3ψ380V 60/50Hz |
| Customization service | Non-standard or special requirements are all welcome |
How a Humidity Chamber Works:
The main components of a humidity chamber are mechanisms that
introduce moisture and heat. There are a variety of methods used to
introduce moisture into the chamber, which can be in the form of a
spray or bath. The same concept applies to heat that is supplied in
the form of coils or heating elements.
In most cases, humidity chambers are designed, manufactured, and
produced to fit the setting that the customer requires. Though
there are many varieties of chambers, the basic components of heat
and moisture are necessary to create the needed humid conditions.
Ways of service:
● Solve the problems in using the test chambers timely and
Effectively
● Response within 6 hours once got questions from customers.
● Engineers available to service machines overseas to install and
commissioning
● Training how to install, operate and maintain the machine
● On-site diagnosis and repair / Online diagnosis and repair
● Business Negotiations
Advantage:
1.24 hours online
2. 35 years experiences
3. Sample chamber of each model
4. Best price, fast delivery
5. OEM,ODM
6. Oversea offices
7. Own import and export business license
8. ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
