Single Barrel Tumbling Barrel IEC Test Equipment Drop Height 500mm

Single Barrel Tumbling Barrel IEC Test Equipment Drop Height 500mm

BS1363.1 Clause 20 Figure 20 Tumbling Barrel Tester

Product information:

This tester is according to the standard of BS1363.1 clause 20, figure 20 to manufacture, which is used to do the drop test of the electrical accessories, in order to determine the dropping suitability of the product during transportation or the minimum firm level of security required for the determination of safety requirements.

Plugs shall have adequate mechanical strength and be so constructed as to withstand such handling as may be expected in normal use.

Compliance shall be checked by tests given in 20.1.2 and 20.1.3.

A solid link of stainless steel as shown in Figure 19 is inserted and withdrawn from the fuse clips of the plug 20 times in succession in a normal manner. Not in mis-use conditions, at a rate not exceeding 10 per minute. A standard fuse link complying with BS 1362:1973 is then fitted and the appropriate mechanical strength test completed.

Rewirable plugs are fitted with 3-core PVC 1.25 mm² flexible cord as given in Table 27 of BS 6500:2000, the terminals and cover screws being tightened with the torque given in Table 3.

Non-rewirable plugs are tested as delivered.

Rewirable plugs with clamp type (screwless) terminals are fitted with 3-core PVC 1.25 mm²flexible cord as given in Table 27 of BS 6500:2000. The connection of the conductors shall be made in accordance with the manufacturer’s instructions.

The flexible cords attached to plugs are cut to a length of 150 mm ±5 mm measured from the nearest edge of the earthing pin, precoiled flexible cords being extended before measurement.

Plugs are tested in the tumbling barrel shown in Figure 20. The barrel is turned at a rate of approximately 5 r/min, (approximately 10 falls per minute).

This tester is according to the standard of BS1363.1 clause 20, figure 20 to manufacture, which is used to do the drop test of the electrical accessories, in order to determine the dropping suitability of the product during transportation or the minimum firm level of security required for the determination of safety requirements.

Technical parameters:

Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cost and enhance enterprise’s international competitiveness.

Kingpo is accredited by International Electrotechnical Commission(IEC) and becomes a nominated supplier and is officially issued a CBTL certificate.We are now among the world’s leading laboratory testing equipment manufacturer to produce the highest level and more standard testing equipment for global Electrotechnics labs becoming nominated supplier of NEMKO,UL,PHILIPS,CTK,CVC(Vkan Certification & Testing Co.,Ltd),Dongguan Quality Testing,China Household Electric Appliance Research Institute,Russia National Standard Institute,Belarus National Standard Institute,Korea National Standard Institute,etc.Lamp cap gauges and testing equipments produced by Kingpo,which are calibrated by CNAS and ilac-MRA ,have a high international reputation.

Kingpo aims at manufacturing world class testing equipment for Chinese labs,establishing an independent R&D center and introducing foreign state-of-the-art technology and international high-tech talents.Adopting a creative design concept,taking sensor data acquisition as forerunner,computer control technology as lead,imported transmission device with high accuracy and low noises,we have developed more than one hundred and sixty products.

Lab software Lims system　

Material combustibility testing equipment　

ELectric tool testing equipment

Plug and socket testing equipment

Switch service life testing equipment　　　

Electrical accessories testing equipment

Luminaire testing equipment　　

Household appliances testing equipment　　　

Anti water spray testing equipment

Wire and cable testing equipment

IT product testing equipment　　　　

Battery testing equipment

Kingpo’s domestic customers include Entry-Exit Inspection and Quarantine Bureau, Bureau of Technical Supervision,Product Quality Supervision and Inspection Institute,UL Lab(Underwriter Laboratories),TUV Rheinland,SGS and other electronic manufacturer.Our products are exported to international market and have also established distributorships in HK,Vietnam,Singapore,Thailand,Iran,India,

Africa,New Zealand,Australia ,Germany and so on.

Service is an essential factor to improve enterprise’s competitiveness.Therefore,Kingpo has always made every effort in improve service level and service value.Before sale,we have professional engineering team to provide customers with comprehensive consultant and customized service.After sale,we have after-sale team to offer customer timely and satisfying technical support and product maintenance.

By means of excellent product competitiveness and complete service,our company has won numerous customers high praise and sincere trust.In complying with technical improvement and increased efficiency and quality assurance of these products ,we insist on providing high end products to market and dedicating to being a leader in testing equipment industry.