EFB Pellet Making Machine EFB Fiber Pellet Mill 4t/h
Technical Paremater :
1. Type:KLF880(Vertical)
2. Main motor:200KW
3. Capacity:3-4t/h
5. weight:14.2t
6. Dimesion(mm):4000*2000*2400
7. Roller mode :3 roller/self-lock
Cooling method:water cooling or oil cooling,the roller bearing is
guaranteed for 2 years .
EFB is a major biomass source in Malaysia, Serbia, EFB fiber
contains much lignin, which is quite important for pellet forming
This pellet mill special designed for fiber raw material such as
efb, corn straw ,cotton stalk ,efb ,grass etc . Such as EFB does
not need to be finely crushed again. We can roughly cut the EFB to
a length of 5-8cm and the EFB FIBER can enter the pellet mill
pressing chamber . Or the crushed materials do not need to be
finely screened for direct pelletizeing .
The pellet mill can compactly process various agricultural and
forestry biomass wastes and some industrial products' primary
(rough) processing wastes, such as corn straw, cotton stalk, rice
straw, rice husk, peanut shell, leaves, branches, bark, sawdust,
palm silk, mushroom waste sawdust, animal feces, biogas residue,
garbage, etc. into particles or blocks.
Highligh Advantage of EFB pellet mill Machine :
- More economical operation; The wearing parts of the whole machine are only the roller shell
and ring die, which saves 40% of the cost of wearing parts compared with the traditional pellet mill .
- Strong adaptability of materials; The unique feeding and pressing
chamber structure is suitable for different types from ordinary
biomass (such as wood shavings, crushed materials, wood chips,
bamboo chips, rice husks, etc.), paper and plastic, to fiber, and
one machine can be used for multiple purposes to reduce the
granulation risk caused by the change of raw materials.
- The roller bearing is durable; The pressure roller bearing is guaranteed for 2 years. The whole machine adopts the factory's class a precision bearing,
which has the highest bearing pressure in the industry, low heating
coefficient, stable operation and worry free 24-hour operation.
- Straw does not need to be finely crushed; Forced feeding without
power source and super large pressing chamber structure perfectly
adapt to coarse straw materials. Straw materials can be easily granulated without fine powder, and
the cost of straw crushing can be reduced by 50%.
- 24-hour operation; The unique heat exchange system of the whole
series of products can fully meet the 24-hour continuous operation
under harsh conditions and provide supporting services for high
standard owners.
As mentioned above, we are not sealing the assembly as a one-piece
package (this requires replacement of the entire press roll
assembly, which is expensive), and does not only separate the
bearings and separately lubricate them (requires separate cooling
devices) , cost and energy consumption increased), we integrated it
into the gear box, using gear oil lubrication.
The pelleting chamber space is more than 2 time, and the material
adaptability is more extensive.It can be adapted to the granulation
of bulk or long fiber clogging materials (such as palm silk,
eucalyptus, large shavings and complex plastics, garbage, etc.)
without the need for fine pulverization of materials.
Contact us to get the quotation .
