RPF Refused Paper And Plastic Pellet Making Machine Manufacture
“RPF” is an abbreviation for Refuse derived paper and plastics
densified Fuel, which is a high-grade solid recovery fuel primarily
composed of waste paper and waste plastics from mostly industrial
waste .This pellet calorific value ranges from 20900-41800 kJ/kg
much higher than wood pellet and coal .
As we know, 90% of paper products are made from wood, and 43% of
harvest wood are made into paper products. In this term, Paper
recycling contributes to saving wood resources.And those wood waste
is kind of high caloric value most be made pellet in power plant
,electric generated ,heating centre . So make the waste paper waste
into paper waste pellete is a good recycling way .
And Paper waste means newspapers, magazines, cardboard and any
other form of paper which is free of contaminated matter and is
capable of being recycled.
Introduction of RPF waste pellet machine
This waste Pellet mill is most eye-catching is to solve the biggest
problem of the global pellet mill, burning the roller bearings and
using high-cost grease. Subvert the structure and design concept of
traditional pellet mill, adopt precise gear transmission, press
roller without bearing, and no need for grease, energy saving and
environmental protection; unique three-roller setting and
high-precision planetary carrier can easily drive the material to
form. The bearingless design of the pressure roller realizes
continuous 24-hour non-stop work; the pressure roller is made of
high-performance steel after forging, and its service life is
several times that of similar products.
Quick advantage of RPF waste pellet machine
1. The pressure roller shaft has a built-in box, and no butter is
required.
2. The whole oil cooling adopts a constant temperature plate
cooling system, the oil temperature is constant, and the production
is worry-free.
3. The double-turbo adjustment of the pressure roller is easy to
operate and the adjustment is more accurate.
4. The oil temperature control system adopts automatic temperature
control alarm.
5. High efficiency, energy saving, under the same power, the
production capacity is increased by 30% compared with other models.
6. The double-layer design of the ring die, one ring die is
dual-purpose, and the technology is environmentally friendly.
Wide range of material moisture (12%-25%)
7. The precision production of ring die and pressure roller can save 50-70% of the cost compared with other equipment. Without grease, it saves 3-5 usd in production costs compared to other equipment.
8. The equipment has low failure rate and extremely low maintenance
cost.
9. Wide range of materials: waste ,sawdust, straw, bagasse,
eucalyptus bark, peanut husk, rice husk, miscellaneous wood,
bamboo, etc
The technical data :
| Model | KLF880 |
| Dimension | 4000*2000*2400 |
| Main power | 200kw |
| Ring Die size | Inner 880mm |
| Support power | 7.5kw |
| Pelletizig chamber | no roller bearing in rollers |
| Running temperature | ≤80℃ |
| Roller adjust | Manual |
| Weight | 14ton |
| Running noise | ≤80 |
| Lubrcating method | oil free |
| Cooling method | Oil cooling |
| Output | 3-4t/h |
| Running time | 24hours |
Waste Pellet mill is suitable to make pellets with the diameters of 22mm, 24mm and
28mm, customers can use different diameters ring die to produce
suitable pellets according to the actual requirements.
The total process of waste pellet :
Waste Pellet application :
1. Cement kilns ·
2. RDF power plants ·
3. Coal-fired power plants ·
4. Industrial steam/heat boilers ·
5. Pellet stoves
Application show :
