Continuous Galvalume Line for Cold Rolled Coils
The continuous hot - dip galvanizing/galvalume line is a set of
equipments that plating a layer of zinc or aluminum alloy on the
strip while in high temperature. The production line was composed
of uncoiler, welder, storage tank, degreasing section equipments,
continuous annealing furnace, zinc pot, air knife, skin pass,
tension leveler, oiler, shear, recoiler and other equipments.
JJRS assembles excellent technology research team, high qualified
management personnel, perfect management system and powerful
engineering design and complete project capability. As an
integrated solution provider, we are willing to provide iron and
steel enterprises of all over the world with highest quality
products and services, from general engineering contracting,
integrated production lines, to single equipment, even components
and spare parts.
Brief Introduction of 0.25~2.2mm*650~1350mm Continuous Galvalume
Line
The continuous galvalume line is used to produce high quality
galvalume steel sheets, it can realize the recrystallization
annealing of cold rolled steel strip and deposit an equal thickness
coating on the surface.
Technical Process
Coil loading → Decoiling →Head Cutting → Entry Looper → Degreasing
(Alkali Spray+Alkali
Brush+Electrolysis Cleaning + Water Brush + Water Cleaning)→ Hot
Air Drying → Annealing
Reduction → Galvanizing → Air Cooling → Water Quenching Cooling →
Air Jet Dry → Skin
Pass → Tension Leveling → Passivation → Exit Looper → Oiling
(reserve)→ Cutting →
Recoiling → Coil Unloading → Packing.
Packing and Shipping
1) Seaworthy package and necessary measure is taken to protect the
Equipment from moisture,
rain, rust, corrosion, shock and damages according to their
different shapes and special features.
2) With clear pack list outside and inside the case .
3) In accordance with the characteristics and different
requirements in loading, unloading and
shipping different equipment, the package is conspicuously marked
with "HANDLE WITH
CARE", "RIGHT SIDE UP","KEEP DRY", ect.
Technical Parameters| Material | Hot rolled coil, cold rlled coil |
| Width | 650mm~1350mm |
| Thickness | 0.25mm~1.6mm |
| Type | Continuous |
| capacity | 150,000t/year |
