1,Vacuum,Spray& Chest

1. Connect small suction glass tube to the suction/spray hose; put the hose to the suction port of machine, press the small hole on the small glass tube, then machine is ready for suction operation.
2. Connect spray bottles to the suction/spray hose; put the hose to the spray port of machine, press the small hole on spray bottle then the machine is ready for spray like mist.
3. If you turn on the machine without vacuum force, belong to the normal phenomenon, slightly etc. a short moment can immediately recover normally. The vacuum force size adjustable stanza metals knob, the agreeable hour hand is big

Ultrasonic

1. Before operation, clean face well with proper cream.
2. Wash off the cream then steam face 10 minutes.
3. Clear out the dirty for strengthen ultrasonic working.
4. Spread shrink water o the face and tap it gently then wipe off it.
5. Test skin conditions then spread the suitable medicine cream on the face.
6. Turn on the machine then adjust the power of probe to fit skin well.
7. Set timer to show 15minutes the normal work time.
8. Press the button to choose type of wave shape out.
9. Massage on skim covered medicine cream with probe.
10. After over the operation, turn off the machine and clean the dirty probe.
11. If use the machine coming with the Chinese traditional medicine mask powder, it will have better effect.

High-Frequency

1. Insert the Ozone electrode into the handle and keep touch well.
2. Connect the plug to the power outlet then turn on the machine.
3. Turn the button of energy lever to choose appropriate level according to skin conditions and type then begin to operate.
4. After over the operation, turn the button of energy lever to “O” mark and turn off power, pull out the electrode and clean well and dry storage.

Brush

1- Select appropriate brush and insert into the head .It will be lock in place. When here a “ka” sound.

2-Turn switch “ON” Set speed according to client’s skin condition and procedure.

3- The way to change brush: Turn switch “OFF” use a slight force to pull off the brush. Insert another brush as needed turn switch“ON”.

4-Viscose sponges and warm water may be used to remove excess treatment product from client’s skin.