GDT 1000V Solar SPD BRPV3-1000GD DC surge protection device surge
protector
GDT 1000V Solar SPD Feature:
• Pluggable modular multi-pole PV SPD.
• Din rail mountable.
• EU Category: Type 2.
• Flame retardant PC shell
• Status indication as standard.
• Remote signaling contact: optional.
• Protective Elements: High Energy MOV.
• Complies with IEC61643-11 and EN61643-31.
• Mode of Protection: (DC+) – PE, (DC-) – PE, (DC+) – (DC-).
• This series’ working voltage covers 500V, 600V, 800V and 1000V
1500V.
• Built-in over current and over heat, temperature control open
circuit technology.
GDT 1000V Solar SPD Product Details:
| BRPV3 1000 GD |
| SPD classification according to EN61643-31 | Type 2 |
| SPD classification according to EN50539-11 | Class II |
| Max. continuous operating dc voltage Ucpv | 1200V |
| Nominal discharge current (8/20us) In | 20kA |
| Max. discharge current (8/20us) Imax | 40kA |
| Voltage protection level [(DC+/DC-)→PE] Up | ≤4.0kV |
| Response time tA | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ |
| Operating state / fault indication | green / red |
| Cross-section area (Min.) | 4mm2 |
| Cross-section area (Max.) | 35mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermoplastic UL94-V0 |
| Degree of protection | IP20 |
GDT 1000V Solar SPD Dimension:
GDT 1000V Solar SPD Advantage:
● For equipotential bonding of positive and negative busbars of
photovoltaic systems and elimination of transient
overvoltage that originates during the atmospheric discharges or
switching processes.
● For Photovoltaic protection against surges at the boundaries from
lightning protection.
Our Services:
• 20 years global leading profession manufacture of electrical
products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own
requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
Why need surge arrester?
Large single surge events, such as lightning, can reach hundreds of
thousands of volts and can cause immediate or intermittent
equipment failure. Although these surges may be smaller in
magnitude, they occur more frequently and with continuous exposure
can degrade sensitive electronic equipment within the facility. The
use of adapted surge protections is then highly recommended.
Installation instruction:
• Mount the SPD on 35 mm DIN rail.
• The SPD is placed in parallel between the energized conductors
and ground.
• The selected SPD must be specifically designed, rated and
approved for application on dc PV voltages.
Company profile:
Wenzhou Britec Electric Co., Ltd. is a manufacturer and exporter
specialized in SPDs. Such as ac surge protector, dc surge
protection, LED lighting surge arrester, data surge protective
device and so on. Our company is located in Yueqing, Zhejiang,
China. Convenient transportation, excellent quality and prices and
good service attract customers from each place of the world. Our
company culture is "sincere and trustworthy, punctuality, high -
quality" Welcome every clients!
Our certificate:
We got CB, CE, TUV,RoHS Certificate:
Payment:
| Payment Term | T/T | EXW | 30% T/T in advance, paid the balance before shipment. |
| FOB |
| CIF | 30% T/T in advance, paid the balance against copy of B/L. |
| L/C | L/C amount above 50,000 usd, we can accept L/C at sight. |
| Paypal | Amount lower than 5000usd. |
| Delivery Time | 15-30 days after receiving deposit. |
Factory:
FAQ:
1.Why solar systems need surge protection?
Solar arrays, like all electronic devices, are prone to surges in
voltage that can harm components and increase downtime. Surge
protection devices can help keep systems running and profitable.
2. Which type SPD is this?
This is Type 2. Which means Permanently connected SPDs intended for
installation on the load side of the service disconnect overcurrent
device, including SPDs located at the branch panel.
3. What is the IP rating of this?
This is IP 20. ie; finger-safe construction
