Filter Drier With Sight Glass for Refrigeration SEG Series
Product Introduction:
The SEG series liquid line filter drier/sight glass combination is
a liquid line filter drier with a sight glass brazed directly to
the outlet side of the filter drier. The filter drier is designed
with 3A molecular sieve desiccant for excellent moisture adsorpiton
with CFC, HCFC and HFC refrigerants. The filter media will remove
small particles down to 10 microns in size from the refrigerant to
help prevent plugging prifices and tubes. The pre-assembled
combination reduces the amount of field brazing required, saving
both time and reducing the potential for leaks. This sight giass
allowa the technician to see the refrigerant in its’ current state,
helping to identify poorly charged sysytems with poor airflow
across the condenser coil or systems, with unusual pressure drop
causing the refrigerant to “flash” and prooduce bubbles in the
liquid line. The sight glass has a built-in moisture indicatoe
which provides visual color change from green to yellow in response
to the moisture content of the refrigerant, indicating the serve of
change need.
The SEG filter drier/sight glass combination is available in flare
or solder, inch or mm sizes, making it possible to meet a wide
variety of system requirements. Other connection styles are
available on special request.
Feature:
1.Filter drier and sight glass with moisture indicator in one
compact, easy-to-install unit
2.Less expensive than purchasing both units separately
3.Little installing time
4.Fewer connections reduce the opportunity for leaks
5.Compacted gasket, spring loaded design
6.Excellent moisture removal capacity
7.Low pressure drop
8.filtration down to 10 microns
9.Large wrench flats on flare fittings
10.For a variety of refrigerant R-134A,R-404A, R-407C, R-410A,
R-500, R-502, R-507
11.Maximum working pressure:4.70Mpa/680Psig, with the UL and CE
certification
Product Data:
| Model No. | Connection (IN) | Volume (CU.IN) | Dimension (IN) |
| Flare (SAE) | Solder (ODF) | A (IN) | B (IN) | C (IN) |
| SEG-162 | 1/4 | | 16 | 7.53 | | 2.5 |
| SEG-163 | 3/8 | | 16 | 7.91 | |
| SEG-163S | | 3/8 | 16 | 7.65 | 6.27 |
| SEG-164 | 1/2 | | 16 | 8.06 | |
| SEG-164S | | 1/2 | 16 | 7.71 | 6.27 |
| SEG-165 | 5/8 | | 16 | 8.31 | |
| SEG-165S | | 5/8 | 16 | 8.04 | 6.27 |
| SEG-303 | 3/8 | | 30 | 10.74 | |
| SEG-304 | 1/2 | | 30 | 10.62 | |
| SEG-304S | | 1/2 | 30 | 10.27 | 8.83 |
| SEG-305S | | 5/8 | 30 | 10.6 | 8.83 |
Q1: Can you provide sample?
A1: Yes, we can send the sample for free but not including the
sample freight.
Q2: What kind of Certificate do you have?
A2: Our products have the ISO9001,ISO17025,ISO14001,ISO14001,ISO
45001 SCOC.
Q3: How are orders packed?
A3: Normally boxes packed inside an outer carton and placed on a
wooden pallet.
Q4: How long is the warranty of your products?
A4: We provide one year after-sale guarantee.
Q5: Can you produce the products labeled with the client's brand?
A5: OEM, ODM are supported.
Q6: What kind of payment terms do you accept?
A6: Normally 30% T/T in advance as deposit, balance paid before
shipment.
