What is KINKAI heat pump brand fruits/vegetables/seafood/herbs etc
cabinet dryer?
KINKAI brand heat pump dryer,infact is use of the heat pump
technology applying into drying. A Heat pump dryer is the use of
reverse carnot principle, absorbing outdoor hot air and
transferring them into the drying room, to realize the temperature
of drying room, cooperate with relevant equipment to realize the
material drying.The heat pump dryer main parts including
compressor, heat exchanger , choke, heat absorber - compressor unit
constitute a circulation system, etc.Under the action of
refrigerant in the compressor circulating in the system.It made
within the compressor gas booster heating process (temperature up
to 100 ℃), heat release it into the machine-- high temperature
heating drying room air, while being cooled and translated into
flow liquid when it runs to the outside machine, rapid heat
evaporating liquid into a gas again, at the same time, the
temperature dropped to minus 30 ℃, 20 ℃, the air surrounding the
heat absorber will continue to transfer heat to the refrigerant.The
refrigerant cycle is constantly realize heat from the air transport
to the drying room heating the air inside the room.
Below parameter is electric infrared lamps drying baking oven:
The heating speed is fast, the environmental protection, and the
maintenance is simple. It is suitable for surface treatment of
baked products that are sprayed with powder.
Inside | 5600*2500*2500(mm)(L*W*H) |
Outside | 5800*2700*2800(mm)(L*W*H) |
Entrance Door | Aluminum alloy binding framework(thickness:1.8mm),
1set hinged door size:2000*2200mm(W*H) |
Wallboard | 100mm rock wool panel insulation material with S=0.526 two side
steel panel |
Roof | 100mm rock wool panel insulation material with S=0.526 two side
steel panel |
Floor | 100mm rock wool panel insulation material with S=0.526 two side
steel panel |
Heating System | Be equipped with 54pcs infrared lamps.
The operating temperature can reach: 220°C |
Electric Control System | Baking, Temperature Controller, Breakdown Indicator, Power Switch,
Emergency Stop Switch and time setting. |
Voltage | 380V 50HZ 3 phase |
Total power | 54kw |
Additional information | This is customized products.About customized product:Please tell us the required sizes or
information of your parts going to paint /bake,such as each day
finished items quantity, max.size ,weight etc. Your provided information will be helpful for making more suitable
option for you. Call us for more new details. |
Our advantages:
1) Direct factory with 10+ years manufacturing experience in test
equipment.
2) Products are in accordance with ASTM, IEC, ISO, JIS and other
international standard.
3) Overseas technical and onsite installation support, have been 8
countries, such as America, Turkey, Australia etc.
4) Professional R&D staff with more than 5 years experience in
this filed.
