Best Selling Product Press Hot Patch Silicone Rubber Vulcanizing
Machine
The bottom plate of the vulcanizer is mostly ordinary carbon steel,
and the tire is vulcanized by high-temperature steam. During this
process, part of the water condensed penetrates into the surface of
the bottom plate, causing the surface of the bottom plate to be
partially corroded and uneven. Because the surface of the bottom
plate is seriously corroded, the surface of the insulation board
cannot be closely matched, and the insulation board is easily
damaged under high pressure. The traditional method is mainly to
re-machine or replace new equipment after surfacing welding. At
present, polymer composite materials can be used for on-site
repair. Because the material has excellent adhesion, good corrosion
resistance and good compressive strength, it can effectively solve
the unevenness caused by the condensed water on the bottom plate of
the vulcanizer during the operation of the bottom plate, thereby
avoiding the damage of the heat insulation board and providing the
user equipment. It provides a good guarantee for normal operation
and safe production.
Introduction to the structure of the vulcanizer:
1. Structural stability: a special four-column structure is
adopted, the upper seat is reinforced with medium carbon steel, and
the upright column is thickened and hardened to ensure structural
stability and accuracy.
2. System: The high plane pressure equalization correction is
adopted, and the pressure (18mpa) strengthens the nut leveling
device, which can increase the parallelism of the upper and lower
heating plates to 0.05mm.
3. Temperature control system: Adjustable from room temperature to
350°C, using intelligent temperature control to control the
temperature fluctuation range within ±2°C.
4. Operating system: PLC combined with touch screen, whether
debugging or production, can be controlled directly and simply.
5. Operating system: The optimally designed oil circuit and
high-quality oil circuit accessories ensure the smooth operation of
the entire oil circuit system from the principle and accessories.
6. Energy-saving system: The heating plate adopts the deep hole
processing technology, which is closely matched with the heating
pipe to reduce the heat loss during the heat transfer process.
7. The intelligent system can automatically push out the mold,
thereby reducing the labor time of the staff, increasing
efficiency, high output and saving time.
Scope of application:
Children's toys, baby products, kitchen supplies, clothing labels,
equipment seals, etc.
