Fulund factory Automatic 4 Station Heat Press Machine for hot
transfers heat very good price
How to use the heat transfer machine
1. Pull up the direct pressure handle to fully open the heating
plate. Plug in the power supply, turn on the power switch, the
indicator light is on; Note: Due to the high power of the machine,
the whole machine must have a suitable and reliable protective
ground wire! ! !
2. Temperature adjustment: Press the "+" or "-" key to set the
temperature, press the "+" key to increase the temperature setting
value, and press the "-" key to decrease the temperature setting
value.
3. Adjust the left timer knob to the appropriate time to 10 seconds
(the length of time depends on different materials);
4. When the temperature reaches the set value, the machine will
automatically enter a constant temperature state;
1. Single Double or Four stations heating(optional)
2. independent temperature controller
3. Semi Automatic move and automatic press
4. Temperature tolerance less than ±3ºC
5. Serveral sizes of work table options:
38x38cm
40x50cm
40x60cm
6. Laser line positioning(optional)
7. Warranty: one year
8. Certificate:CE
Pneumatic automatic heat press machine
This Pneumatic automatic heat press machine was semi automatic
machien that heat press fabric, cloth, poster, mouse pad,sheet,etc.
It is pulled by hand and press automatically. This press machine
provide really steady perfermance and long life expectancy.
