Nike Adidas Fully Automatic Shoe Making Machine for Vertical Foam
Cutting OEM ODM
Fulund has a long history since its establishment in 1999. Due to
the needs of development, the original brand (TYL) expanded the new
brand Fulund in 2022 . Fulund has customers all over the world,such
as international brands shoe manufacturer.
Fulund mainly products: Hot label machine, foam cutting machine,
insole hot stamping machine, shoe tongue transfer hot stamping
machine, insole heat transfer machine, insole cutting and transfer
integrated machine, insole printing machine, silk screen printing
machine, embossing machine, soft rubber equipment , vacuum
vulcanizing machine, silicone labeling machine, glue dispensing
machine, etc.
FLD-966B Skiving foam machine
advantage:
1.Save power,only 0.65KW.
2.environmenal protection,lower noisy,none powder.
3.quality proved to be smoth and standard.
4.capacity:1500-1800 pcs/h
5.placement:volume is small,save place.
old machine disadvantage
1.large power needed.always above 3KW.
2.environment cann't be protect,big noisy and many power.
3.quality:surface is rough and missing.
4.capacity:150 pcs/h
5.placement:volume is big,not good for working line.
1,The range of use is widely.The products are fit for each part of
all kinds of shoes.Such as:the inside and outside edge and bevel
edge of used immersing cotton of tongue for shoes,flatting collar
,pinna.
2,Saving manpower ,cost ,and man-hour.The output increases greatly
.
3,Environmental protection: the products can make cleanliness of
woking substance high ,dust little ,and the mouth of plane smooth
and normalized.
4,The machine can adjust according to thickness of machined
parts.The machine is easy to operate and little comsuption ,low
failure rate,perfect safely performance.
| Model No. | Machine measure(mm) | Wood case measure(mm) | N.W/ G.W (kg) | Capacity |
| FLD-966B | 1250*400*950 | 1500*600*1200 | 75/95 | 1500~1800pcs/hours |
| Voltage | Warranty | Power | Brand Name |
| 380V | 1 Year | 0.5kw | FULUND |
