Fulund factory silicone rubber vulcanizing machine for Clothing 3d
Rubber Reflective Custom Heat Transfer Printing
Fulund has a long history since its establishment in 1999. Due to
the needs of development, the original brand (TYL) expanded the new
brand Fulund in 2022 . Fulund has customers all over the world,such
as international brands shoe manufacturer.
Fulund mainly produces: Hot label machine, foam cutting machine,
insole hot stamping machine, shoe tongue transfer hot stamping
machine, insole heat transfer machine, insole cutting and transfer
integrated machine, insole printing machine, silk screen printing
machine, embossing machine, soft rubber equipment , vacuum
vulcanizing machine, silicone labeling machine, glue dispensing
machine, etc.
The storage environment of the vulcanizer should be kept dry and
well-ventilated to avoid the electrical circuit being wet due to
moisture; do not use the vulcanizer outdoors in rainy days to
prevent the electric control box and heating plate from entering
the water; When the machine is used, it should be elevated with
items on the ground, and the vulcanizer should not be in direct
contact with water.
If water enters the heating plate due to improper operation during
use, you should first contact the manufacturer for maintenance. If
emergency repair is required, open the cover on the heating plate,
pour out the water first, then set the electric control box to
manual operation, heat it to 100°C, keep it at a constant
temperature for half an hour, dry the circuit, and put it in the
Belt gluing is performed manually. At the same time, the
manufacturer should be contacted in time for the overall
replacement of the line. If you encounter something that you can't
solve during use, you must remember to contact the manufacturer in
time, and don't repair it at will without knowing the equipment.
Scope of application:
The machine is mainly used for punching, trimming, insole transfer,
trademark hot stamping, printing, etc. .
