ASTM XM-13 Stainless Steel Flat Bar UNS S13800
Description
All of ASTM XM-13 Stainless Steel Flat Bar conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,Stainless Steel Flat Bar,PH13-8Mo, ASTM XM-13, UNS S13800
- Shape:Stainless Steel Flat Bar.
- Square bar / Flat bar: 3mm to 800mm.
Products Details
| Chemical Composition (weight%): | C(％): ≤ 0.05 |
| Si (％): ≤ 1.00 |
| Mn (％): ≤ 0.20 |
| P(％):≤ 0.010 |
| S (％):≤ 0.008 |
| Cr (％): 12.3 ~ 13.2 |
| Ni (％): 7.50 ~ 8.50 |
| Mo (％): 2.00 ~ 2.50 |
| N (％): ≤ 0.01 |
| Al (％): 0.90 ~ 1.35 |
Mechanical Properties Under
Final Heat Treatment: | Solution treatment temperature and cooling ways: 927 +/-15℃ |
| Steel plate thickness /mm: 0.038~101.6 |
| Tensile strength, σb≥/MPa: - |
| Yield strength, σ0.2≥/MPa: - |
| Elongation, δ ≥(％): - |
| Hardness ≤|HRC: 38 |
| Hardness ≤|HBS: 363 |
Applications:
ASTM XM-13 Stainless Steel Flat Bar is a martensitic
precipitation-hardening stainless steel that has excellent
strength, high hardness, superior toughness, and good corrosion
resistance.
Compared to other ferrous-base materials ASTM XM-13 Stainless Steel
offers a high level of useful mechanical properties under severe
environmental conditions.
ASTM XM-13 Stainless Steel uses: Aerospace components, landing
gear, nuclear reactor components, petrochemical industry, injection
molding equipment etc.
Equivalent Grade
PH13-8Mo, ASTM XM-13, UNS S13800
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of ASTM XM-13 Stainless Steel Flat Bar UNS S13800 and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, bending, set
length, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
