automatic high speed printer slotter diecutter stacker& vibration
machinery
ü Gluing part: The non-stop method or the gluing system of the
gluing part is used to avoid easy adjustment of the glue curing
rubber wheel gap. The dial is suitable for paperboard with a
thickness of between 1 and 9 mm. The amount of glue applied is easy
to adjust.
ü In order to improve the speed of the belt speed bridge and
flexographic printing slot production speed adjustment. At the same
time, the folding belt, the conveyor belt produces a flexographic
printing slotting speed almost the same, to avoid the folder and
the water-based printing slotted parts are not synchronized, which
may cause the cardboard to jam and achieve accurate delivery.
ü The upper and lower belt speeds can be adjusted separately, ie
their speeds are different and can be adjusted to the same speed.
ü The folding cardboard adopts a belt or rubber roller to
facilitate the adjustment of the folding angle.
ü The paper feed section uses spring pressure to adjust the gap,
and the thickness of the cardboard is automatically adjusted
between 1 and 9 mm.
ü Cardboard stacking and counting pieces.
ü The stack of cardboard is mechanically and sensorized for full
automation.
ü The counter (sensor) counts the number of cartons for easy setup
and reliability.
ü The stack of cardboard uses computer counting and precise
pushing.
| Maximum mechanical speed (pieces/S) | 260 |
| Inside width of the machine (mm) | 2800 |
| Maximum continuous feeding size (mm) | 1400*2800 |
| Maximum paper feeding size of each sheet (mm) | 1600*2800 |
| Maximum printing size (mm) | 1400*600 |
| Minimum feeding size (mm) | 400*720 |
| Minimum slot size (mm) | 300*100*300*100 |
| Standard printing plate thickness (mm) | 7.2mm |
| Power during production (kw) | 33KW |
| Total power (kw) | 30KW |
| Wallboard thickness (mm) | 50 |
automatic high speed printer slotter diecutter stacker& vibration
machinery
