Hot Melt Adhesive Glue With Low Temperature Resistant For Deep
Freeze Labels
Description:
This product is a synthetic rubber based hot melt pressure
sensitive adhesive specifically developed for label applications
where good permanent adhesion is required.
The product is featured excellent tack and peel, good wetting to
substrates and good die-cuttability.
Suggested use:
Permanent labels, logistics labels and other pressure sensitive
applications that high tack, peel strength and good die-cuttability
are required.
Technical specification:
| Appearance : | Yellow translucent solid |
| Color (Gardner) : | ≤ G5 |
| Softening Point (R&B) : | 98℃ |
| Viscosity (Brookfield)@180℃ : | 3,800 cps |
Operating guide:
The material can be applied by slot or roll coating applicators.
Suggested operation temperature is 150 – 180℃ for both, depending
on machines, substrates, and plant conditions.
FDA:
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
Package:
6.25kg or 1kg block wrapped with siliconized release paper, or with
meltable film 25kg/box. Please consult the sales representative for
special requirements.
Storage & Shelf life:
The intact packing material can be stored indoor for 24 months from
the date of manufacture, in its original packages under dry and
clean conditions at ambient temperature below 35℃ and above 5℃.
Direct sunlight and moisture condensation must be prevented.
Operating & Precautions:
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal protective clothing
and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
generated.
Rotate stocks and using the oldest stock first.
