America Standard Extruded Magnesium Anodes Are Used To Extend The
Life Of Home And Commercial Water Heaters
Cathodic Protection Magnesium Anode Rod for Solar or Electric Water
Heater
Specifications
Casting Magnesium Anodes are usually used in a small diameter
anodes requirement, such as for water heaters, boilers, water
storage tanks, heat plumbing, gas stations CP systems. It is the
important component part with only one purpose to protect metal
tank from corrosion.We can supply the the casting Magnesium anode
rod with different diameter and length.
Most popular and standard diameter in 14mm, 16mm, 18mm, 20mm, 21mm,
22mm, 24mm, 26mm, 28mm, 30mm,33mm, etc.
The inside screw can be in M4, M5, M6, M8, M10,M12,etc.
Application
Casting Magnesium Anodes are usually used in a small diameter
anodes requirement, such as for water heaters,boilers,water storage
tanks,heat plumbing,gas stations CP systems. It has properties of
softing water, de-dirt residual ,en-longing the working life of
container.
Chemical compositions Casting Magnesium Rod Anodes
| Type | Al | Zn | Mn | Fe | Cu | Ni | Si | Others | Mg |
| AZ63B | 5.3-6.7 | 2.5-3.5 | 0.15-0.60 | 0.003 | 0.02 | 0.001 | 0.08 | 0.3 | Balance |
| MgAlZn | 5.0-7.0 | 2.0-4.0 | 0.2-1.0 | 0.02 | 0.05 | 0.002 | 0.3 | 0.3 | Balance |
Electrochemical properties of Casting Magnesium Rod Anodes
| Type | Open-circuit voltage (-V) | Close-circuit voltage (-V)Zn | Actual capacitance (A·h/g) | Current efficiency (%) |
| AZ63 | 1.50-1.55 | 1.45-1.50 | ≥1.105 | ≥50 |
*We can do according to customized size and requirements.
