16mo3 Material 3.5mm Diameter CD Insulation Weld Pins For
Insulation System
Quick Details 16mo3 Material 3.5mm Diameter CD Insulation Weld Pins :
16mo3 Material 3.5mm Diameter CD Insulation Weld Pins
| Material | 16mo3 ,normally are mild steel with copper coating or galvanized
steel are standard, stainless steel and aluminum are available in
special order |
| Surface treatment | no any surface treatment |
| Diameter | 3.5 mm |
| Length | 100mm 125mm 150mm ,200mm ,230mm,240mm,250mm,270mm,370mm ect |
the smallest CD welding pin we have done is 1mm wire ,10mm length
,the longest we have
done is 4mm wire dia,370mm length,special size and material contact
me to make mold !
CD Insulation Weld Pins Specification :
| Specification of capacitor spot weld pins |
| Diameter Of weld nails | Diameter Of Flange diameter (Steel) | Length Of flange diameter (Aluminum) |
| 12GA 2.7mm | 0.180"(4.6mm) | 0.235"(6mm) |
| 10GA 3.4mm | 0.218"(5.5mm) | 0.255"(6mm) |
| Length is as your requirement, common size is 63.4mm, 84mm, 90mm,
114mm, 130mm |
| Material | carbon steel ,stainless steel ,copper ,aluminum |
| surface finished | copper plated or zinc coated for mild steel weld pins. |
| Fixing parts | 38mm self-locking washer and 32mm dome cap washer in common ,other
size is available |
| Application | Insulation System |
Pic Of Capacitor Discharge Spot Weld Pins :
Featurer Of Capacitor Discharge Spot Weld Pins :
Features of Capacitor discharge spot weld pin |
BETTER PLATING | weldpin shanks Zinc and Chromate plated exceeding SMACNA standards
and providing a professional appearance.Climatech weldpin shanks
are copper plated. |
REDUCED DOWN TIME | Consistent point quality reduces frequency of machine adjustments. |
STRONGER WELDS | Hardened steel point assures positive electrical contact for
complete sheet to pin fusion. |
CORROSION RESISTANCE | Plating exceeds current SMACNA standards for corrosion resistance. |
TEMPERATURE RANGE | CD Weld pins function properly over normally accepted operating
range of temperatures of 0 degrees C to 121degrees C and are not
adversely affected at temperatures of 0 degrees C to 287 degrees C. |
VIBRATIONS | CD Weld pins will not fatigue or be physically affected by
vibrations normally found in high velocity air handling systems. |
Application Of Capacitor Discharge Spot Weld Pins :
The CD copper coating weld pin is a capacitor discharge weld
insulation fastener, these insulation weld pins
work with a stud welding machine, weld the pins on the sheet metal,
then put the insulation material through
the weld pins, press a self locking washer or metal clips or dome
caps onto the pin, bend over or clip off the
pin to finish fastening insulation installation. Weld nails are
usually used shipping industry.
Package Of Capacitor Discharge Spot Weld Pins :
>> Package
1. 500 pcs per bag, 10 bags per carton. 64 cartons per pallet.
2. to be your requirements.
>>> Delivery
Sample: DHL/EMS/UPS/TNT/EXPRESS
Large Order: we recommend you by SEA ,or by AIR if in an emergency.
XY PARTS Company Products line:
CD weld pins Lacing Anchors
bimetallic pin Cup head weld pins
Quilting pins perforated base pins
self adhesive pins aluminum solar panel mesh clip
all kinds of self locking washers, Dome caps.
