High precision metal cutting circular saw welding cutting iron pipe
machine flying saw cutting machine
Introduction
"CNC Milling Cold Saw" adopts double-edge polar coordinates and
two-axis motion control technology. Burr-free, low-noise,
high-quality cutting. It is suitable for medium and large diameter
pipes with thick wall and high strength. The same goes for square
and rectangular tube cuts.
| Material | Q195 Q235 SPCC |
Cutting range | Round tube:MAX114mm | thick:0.5～4.0mm |
| Square tube:MAX90×90mm | thick:0.5～4.0mm |
| Rectangular tube:MAX 50×90mm | thick:0.5～4.0mm |
| Production speed | 80m/min(length 6 meter,dia.≤25mm) |
| Cutting length | 1500-99999mm |
| Length tolerance | ±1.5mm(speed diviation not more than 2%)； |
| Feeding direction | |
| Operation height | 800mm |
| Cutting burr height | Max:0.25mm； |
| Power supply | AC380V,3PH,50HZ |
Features
1. Equipped with adjustable cooling spray pipeline to flush the
impurities and iron filings on the saw blade and clamping block;
2. Sawing method: saw blade and feed are adjustable, that is to
say, the speed of the feed servo motor is variable, and the speed
of the saw blade is variable, so that the utilization rate of the
saw blade is greatly improved; and the saw blade wear protection
system is provided.
3. The saw blade is equipped with a steel brush device to remove
iron filings on the saw blade when rotating;
Our service
1. Professional pre-sales consultation and after-sales service to
help you find the best solution
2. Discuss technical details with our professional engineers
3. Strictly control the quality and production plan of the cold
flying saw. You will be kept informed of any progress
4. Check the cold flying saw before shipment
5. After the warranty period, spare parts are provided at cost
6. Professional engineers help you increase production, reduce
waste and reduce costs
7. Control the production progress and quality of the machine, and
provide you with detailed information in time
