Factory Price Cold Cut Metal Saw Circular Saw Cutting Rectangular
Machine Cutting Flying Saw
Introduction
In the process of cold cutting, the workpiece will not change the
material due to the high temperature caused by friction, the
operator's fatigue is low, and the sawing efficiency is improved.
The sawing process has no sparks, no dust, no noise, energy saving
and environmental protection.
| Material | Q195 Q235 SPCC |
Cutting range | Round tube:MAX114mm | thick:0.5～4.0mm |
| Square tube:MAX90×90mm | thick:0.5～4.0mm |
| Rectangular tube:MAX 50×90mm | thick:0.5～4.0mm |
| Production speed | 80m/min(length 6 meter,dia.≤25mm) |
| Feeding direction | |
| Operation height | 800mm |
| Power supply | AC380V,3PH,50HZ |
Features
1. Equipped with adjustable cooling spray pipeline to flush the
impurities and iron filings on the saw blade and clamping block;
2. Sawing method: saw blade and feed are adjustable, that is to
say, the speed of the feed servo motor is variable, and the speed
of the saw blade is variable, so that the utilization rate of the
saw blade is greatly improved; and the saw blade wear protection
system is provided.
3. The saw blade is equipped with a steel brush device to remove
iron filings on the saw blade when rotating;
Our service
1. Professional pre-sales consultation and after-sales service to
help you find the best solution
2. Discuss technical details with our professional engineers
3. Strictly control the quality and production plan of the cold
flying saw. You will be kept informed of any progress
4. Check the cold flying saw before shipment
5. After the warranty period, spare parts are provided at cost
6. Professional engineers help you increase production, reduce
waste and reduce costs
7. Control the production progress and quality of the machine, and
provide you with detailed information in time
