Gas Filled Suspension Air Spring Rear Right 1995-2002 Year Lincoln Continental Air Ride Kit

Suspension Air Spring Rear Right 1995-2002 Year Lincoln Continental Air Ride Kit

The Description Of Air Suspension Spring

The air suspension that people mentioned, to be precise, is a suspension that uses an air spring as an elastic element. In order to achieve height and stiffness control, an electronic control system and an air pump are usually added. Air springs are widely used in vibration isolation of automobiles, buses, rail vehicles, machinery and equipment and building foundations. Air springs are generally made of rubber and must have good airtightness and compressibility. After the compressed gas with the air pressure of 0.5-1MPa is charged into the air spring, the compressibility of the gas is used to realize its spring function. Its spring stiffness is variable. When the load acting on the spring increases, the gas in the airtight container is compressed, the air pressure increases, and the spring stiffness increases; on the contrary, when the load decreases, the air pressure in the spring decreases and the stiffness decreases. Therefore, it has ideal variable stiffness characteristics to ensure that the natural frequency of the body remains basically unchanged under different loads.

LINCOLN CONTINENTAL AIR SPRING

Part Number:503009

Original Equipment Number:3U2Z5580MA,3U2Z5580HA,3U 2Z5580 MA,3U 2Z5580 HA,3U-2Z5580-MA,3U-2Z5580-HA

Construction Year:1995,1996,1997,1998,1999,2000,2001,2002

Car Make:Lncoln

Car Model: Lncoln Continental

Position:Rear Right

Package Includes: Air Spring

Gross Weight:1.3kg

Package Box Size:30*14*14 (cm)

This air spring closely matches your original air spring, giving you greater comfort and safety. This new rear air spring fits the right side of Lincoln Continental (4.6L V8) vehicles. Our air springs are made of high quality rubber with a strong seal.

Guomat part number 503009,it is the brand new and high-quality that can replace the original air spring of your car.This air spring closely matches your original air spring,giving you greater comfort and safety.This new rear air spring fits the right side of Lincoln Continental(4.6L V8) vehicles.

The key Line In The Production Of Air Spring

1.Place an additional layer of magnet coils on the air spring: After the material of the bottom layer of the air spring is dried, place an additional layer of magnet coils in the structural connection function according to the design requirements.

2.The air spring is hot-melted to lay a large surface waterproof coating, after positioning the waterproof material, rewind the wire machine again, point the connection between the bottom and the bottom layer, melt the air spring at the bottom of the magnet coil, rotate the magnet coil forward when the temperature rises, and rotate it with a roller to make the magnet The coil is firmly bonded to the base, and the specification and moving speed of the spark are adjusted. When the surface of the magnet coil is just melted, the working temperature of the air spring should be too close in the middle of 200℃-230℃, and the waterproof material will be baked, resulting in the adhesion cannot be opened. . If the spark is small or the distance is far away, the surface of the waterproof material is not sufficiently melted, and the bonding with the bottom layer is not strong.

3. After the front layer of the waterproof magnet coil is hot-melted, the hot-melt magnet coil is pasted, and the edges are hot-melted, scraped with putty and flattened to make an air spring that melts in the gap. It is required that there is no expansion or contraction.

4. After laying the front layer of waterproof paint and hot-melt edging strip on the air spring, slowly lay two layers of waterproof paint (with gabbro), the standard specification is the same as that of the front layer of waterproof paint. Airtightness with Acrylic Paint Industrial Coatings.

5. The tail of the air spring waterproof material is fixed with metal rods, etc., and the airtightness is sealed with rubber.

About Payment And Shipping

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.