Micro Pull Load Cell 1kg Miniature Tension Load Cell 2kg Tension
Sensor 5kg
Miniature S-beam Push Pull Load Cell FSSQ offers a compact design
for a variety of applications. the S Beam Compression Tension Load
Cell series provides accuracy, compact design features, and 5
capacity ranges 1kg / 2kg / 5kg / 10kg / 20kg to choose from.The jr
s-beam load cell FSSQ utilizes metal foil strain gauge technology
to deliver 2.0mV/V output with maximum 0.2% non-linearity of the
full scale, the compact design enables the FSSQ to be easily
embedded into machinery or test equipment – ideal for packaging
machinery, assembly machinery or end-of-line test equipment.The
Micro Force Sensor FSSQ features M2 threaded holes on two sides for
the mounting of attachments or implements for both compression and
tension force measurement applications with limited mounting space.
Micro Force Sensor FSSQ can also be modified or customized as per
client's request.
Dimensions(unit in "mm")
Specifications
| Capacity | 10N / 1kg / 2.2lb
20N / 2kg / 4.4lb
50N / 5kg / 10lb
100N / 10kg / 20lb
200N / 20kg / 45lbs |
| Rated output | 2.0mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Compression@
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Wheatstone Bridge:A Wheatstone bridge is a network of four
resistive legs. One or more of these legs can be active sensing
elements. The Wheatstone bridge is the electrical equivalent of two
parallel voltage divider circuits. R1 and R2 compose one voltage
divider circuit, and R4 and R3 compose the second voltage divider
circuit. The output of a Wheatstone bridge is measured between the
middle nodes of the two voltage dividers.
Rated Capacity: The maximum axial load the load cell is designed to
measure within its specifications.
Non-linearity: The maximum deviation of the calibration curve from
a straight line drawn between the no-load and rated outputs;
expressed as a percentage of the rated output and measured on
increasing load only.
Non-repeatability: The maximum difference between load cell output
readings for repeated loadings under identical loading and
environmental conditions.
Miniature Compression And Tension Load Cell FSSQ outputs mV signal
from the full wheatstone bridge which is proportional to the
applied load,a load cell amplifier can be used to convert mV signal
into -5-5V / 0-10V / 4-20mA for easy signal processing,taking
FSSQ-10N and FSC(-5-5V)-24V for example,the load-voltage
relationship will be 0-10N compression load VS 0-5V output, 0-10N
tension load VS 0-(-5V) output, which is linear regardless of the
measurement error.
Micro Pull Load Cell 1kg Miniature Tension Load Cell 2kg Tension
Sensor 5kg
Click here to download datasheet
