ZT1803 Full Face Dive Masks Communicator Mirror For Underwater
Intercom Wireless Communication System
The ZTDive Full Face Mask is a professional quality mask designed
for maximum safety and comfort while diving or technical diving in
very cold water, shipwrecks or caves. The full face mask features a
fog-resistant single-piece lens that provides wide field of view
and creates an open, airy deep experience. This design is also
ideal for using secondary gas sources, diving in polluted
environments, or setting up underwater communication systems. As a
result, the masks are widely used by military and commercial
divers. However, it is also a viable option for recreational divers
who want to take their diving experience to the next level.
Descriptions :
•Silicone mask with double skirt design;
•The five-claw rubber adjusting belt can adjust the tightness
quickly
•Single lens design, larger field of vision
•It can cooperate with diving breathing regulator, and can be
equipped with underwater headset and microphone for underwater
operation
•No need to bite, reduce jaw fatigue
Specifications:
| Material | Rubber + glass lens |
| Size | All Size |
| Style | Full Face Mask |
| Color | black |
| weight | 600g |
Operation use:
(1) Adjust the fixed band to the appropriate tightness before
wearing the face mirror.
(2) First put the mirror on the right position of the face.
(3) Use the nose to inhale the mirror adsorption on the face.
(4) Adjust the left and right ends of the fixed band to appropriate
tightness by quick adjustment buckle, and the fixed band of the
mirror should be above the ear (tightness should not be too tight).
(5) Hair or head coverings (no hair or head coverings should be
pressed on the skirt of the mirror).
(6) After diving, use quick adjustment buckle to loosen the fixed
band of the mirror.
Common troubleshooting:
(1) Failure mode 1: water enters the mirror
Cause analysis:
A mirror skirt appeared pressure hair, pressure head cover;
B side mirror is too loose or too tight;
C) breathing through the nose;
Troubleshooting:
A. After wearing the face mirror, check whether the hair and head
cover press the skirt of the face mirror;
B. Adjust the face mirror to appropriate tightness;
C Develop the habit of breathing through your mouth.
(2) Failure mode 2: The tightness of the mirror cannot be adjusted
Cause analysis:
A quick adjustment buckle is damaged;
B side mirror fixed belt pulling direction is wrong;
Troubleshooting:
A scrap treatment;
B. The direction of the fixed belt of the drawing mirror should be
the rear direction of both sides rather than the oblique rear
direction;
(3) Failure mode three: the lens is broken
Cause analysis:
A mirror hit by hard objects resulting in damage;
Troubleshooting:
A replace or repair parts;
B Diving equipment maintenance service point or manufacturer
maintenance.
