Power Supply FSP300-60ATV(PF) switching power supply FSP300-60PLN
Industrial Computer Power Supply
Product SKU:FSP17976_Se
Condition:Brand New
Current:115/230V~,10/5A,60/50Hz
Voltage:300W(+3.3V & +5V=200W MAX)
Power:300W
Supports Pentium processors from Intel and Athlon from AMD
passive PFC at 300 watts ATX
80 mm fan, without temperature control
20 + 4 pin plug
Power switch for on and off
UL, TÜV and VDE approval
Housing 140 x 150 x 86mm (PS / 2 design)
Robust universal office and industrial power supply
Maintenance and instructions for the Han FSP300-60PFN adapter:
1. Wiring is exposed. If the cable is worn in any way, this may
result in some internal cable exposure. If the cable is severely
worn and the cable is exposed, the adapter should be stopped.
The cable is broken. A cable break may occur in the flexible
connector near the adapter module or connector. These flexible
joints are used to bend the cable when the adapter module is wound,
but may become brittle over time, causing breakage. If the cable
hits the edge of an object such as a table or stool, it may also
break.
2. The stitches are bent or broken. If the computer port is not
properly inserted, the adapter pins may bend or break completely.
Unplugging or inserting the cable at an angle may cause the center
pin of the adapter to bend. If this happens frequently, the pins
may break and the adapter will stop working.
3. The cable is loose. If your cable is loose, try unplugging the
cable and reconnecting it to make sure it is in place. If the cable
is still loose, check for broken or broken pins or connectors or
cables. If the cable is damaged and it is loose, you must replace
the adapter or cable.
4. The cable is worn. Cable wear is most likely to occur at either
end of the cable connecting the adapter module to the connector
that connects to the computer. This may be due to the number of
times the cable wraps around the adapter module or the cable is
subjected to any unnecessary stress.
Tags:Han FSP300-60PFN Adapter,Han FSP300-60PFN Charger,Han
FSP300-60PFN Power Supply,replacement adapter for Han
FSP300-60PFN,Han power supply FSP300-60ATV (pf).
| MINIMUM
LOAD | NORMAL
LOAD | MAXIMUM
LOAD | LOAD REG. | LINE REG | RIPPLE &
NOISE |
+3.3V | 0.3A | 14A | 15/28A | ± 5% | ± 1% | 50mV P-P |
+5V | 0.5A | 8.75A | 30/21.5A | ± 5% | ± 1% | 50mV P-P |
+12V | 0.0A | 4.2A | 15A | ± 5% | ± 1% | 120mV P-P |
-12V | 0.0A | 0.4A | 0.8A | ± 10% | ± 2% | 120mV P-P |
-5V | 0.0A | 0.15A | 0.3A | ± 10% | ± 2% | 100mV P-P |
+5Vsb | 0.0A | 1.0A | 2.0A | ± 5% | ± 1% | 50mV P-P |
