ASME B16.11 ASTM A182 F316L Stainless Steel Equal Tee Thread NPT ,
Forged Fittings
Threaded stainless steel pipe fittings resist corrosion from caustic chemicals, corrosive fluids, oils,
and gases, and withstand pressure and high temperatures in plumbing
applications and food and dairy processing. Threaded pipe fittings
are threaded on both connection ends. Female threads are on the
inside of a fitting. Male threads are on the outside of a fitting
and screw into the female threads. NPT (American National Standard
Pipe Threads) and BSPT (British Standard Pipe Threads) threads are
distinguishable by their thread taper angle. There are also
straight (NPS) pipe thread fittings and metric (M) pipe fittings.
Metric pipe fittings are identified by the nominal outside diameter
and the thread pitch. These connections do not require glue or
adhesive, but PTFE tape keeps seal tight. Threaded fittings come in
a variety of sizes and shapes.
| Product Pictures and Drawings |
 |  |  |  |  |  |  |  | | 90 Degree Elbow (SW) | 45 Degree Elbow (SW) | Tee (SW) | Lateral (SW) |  |  |  | | Cross (SW) | Socket Weld Fittings |
|
| Socket Weld Dimensional Data |
| 1/8" to 4" class 3000 & 6000socket weld, 1/2" to 2 " class 9000
socket weld |
| Class 3000 | | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | | A | 7/8 | 7/8 | 31/32 | 1 1/8 | 1 5/16 | 1 1/2 | 1 3/4 | 2 | 2 3/8 | 3 | 3 3/8 | 4 3/16 | | B | 29/32 | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/16 | 4 5/16 | 5 3/4 | | C | 0.420 | 0.555 | 0.690 | 0.855 | 1.065 | 1.330 | 1.675 | 1.915 | 2.406 | 2.906 | 3.535 | 4.545 | | D | 3/8 | 3/8 | 3/8 | 3/8 | 1/2 | 1/2 | 1/2 | 1/2 | 5/8 | 5/8 | 5/8 | 3/4 | | E | 7/16 | 7/16 | 17/32 | 5/8 | 3/4 | 7/8 | 1 1/16 | 1 1/4 | 1 1/2 | 1 5/8 | 2 1/4 | 2 5/8 |
| Class 6000 | | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | | A | - | - | - | 1 5/16 | 1 1/2 | 1 3/4 | 2 | 2 3/8 | 2 1/2 | 3 1/4 | 3 3/4 | 4 1/2 | | B | - | - | - | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 6 | | C | - | - | - | 0.855 | 1.065 | 1.330 | 1.675 | 1.915 | 2.406 | 2.906 | 3.535 | 4.545 | | D | - | - | - | 3/8 | 1/2 | 1/2 | 1/2 | 1/2 | 5/8 | 5/8 | 5/8 | 3/4 | | E | - | - | - | 3/4 | 7/8 | 1 1/16 | 1 1/4 | 1 1/2 | 1 5/8 | 2 1/4 | 2 1/2 | 2 3/4 |
| Class 9000 | | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | | A | - | - | - | 1 1/2 | 1 3/4 | 2 | 2 3/8 | 2 1/2 | 3 | - | - | - | | B | - | - | - | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 3 11/16 | - | - | - | | C | - | - | - | 0.855 | 1.065 | 1.330 | 1.675 | 1.915 | 2.406 | - | - | - | | D | - | - | - | 3/8 | 1/2 | 1/2 | 1/2 | 1/2 | 5/8 | - | - | - | | E | - | - | - | 1 | 1 1/8 | 1 1/4 | 1 3/8 | 1 1/2 | 2 1/8 | - | - | - |
|
Forged Steel Elbow : 45deg, 90deg, 180deg. A182/A105 S/W &
SCRD,B16.11,
| Sr. No. | Material | Size | Sch. & Class | Specification | Item |
| 1. | Forged Stainless Steel | 15 NB
To
100 NB | 3000, 6000
&
9000 LBS | A-182
S/W & SCRD
ANSI B16.11 | - Elbow - 90o & 45o
- Tee - Equal & Reducing
- Union
- Cross
- Coupling - Full & Half
- Socket Reducing
- CAP
- Plug-Hex & Square
- Nipples (Hex/Reducing)
- Sokolet & Weldolet
- Bush
- Fasteners
|
| 2. | Forged Alloy Steel | 15 NB
To
100 NB | 3000, 6000
&
9000 LBS | A-182
S/W & SCRD
ANSI B16.11 |
| 3. | Forged Carbon Steel | 15 NB
To
100 NB | 3000, 6000
&
9000 LBS | A-105
S/W & SCRD
ANSI B16.11 |
| Stainless Steel in Grade | ASTM A 182 F | 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321,
347, 410, 420, 440C Etc |
| Alloy Steel in Grade | ASTM A 182 | F5, F9, F11, F12, F21, F22 & F91. |
| Other Grade Available | A-350 LF2 |
| Other Forms | Compression Fitting / Instrumentation / Hydraulic Fitting & Also As
Per Drawing |
| Other Material like Non Ferrous Metals & Nickel Base Alloys | Fittings are also available in Copper (Dow), Brass, Aluminium,
Cupro Nickel (90/10, 70/30), Hastelloy (C-276), Nickel (200, 201,
205), Monel (K400, K500), Inconel (600, 800), Alloy 20, Duplex,
Phosphorus Bronze (90/10, PB2) Etc. as per ASTM, ASME, BS, IS & DIN
Standard |
| Test Certificate | - Manufacturer Test Certificate / Under Third Party Inspection .
- with Excise Gate Pass to avail Modvat benefit.
|
ASME/ANSI B16.1 - 1998 - Cast Iron Pipe Flanges and Flanged
Fittings
This Standard for Classes 25, 125, 250 Cast Iron Pipe Flanges and
Flanged Fittings covers:
(a) pressure-temperature ratings,
- (b) sizes and method of designating openings of reducing fittings,
- (c) marking,
- (d) minimum requirements for materials,
- (e) dimensions and tolerances,
- (f) bolt, nut, and gasket dimensions and
- (g) tests
ASME/ANSI B16.3 - 1998 - Malleable Iron Threaded Fittings
This Standard for threaded malleable iron fittings Classes 150, and
300 provides requirements for the following:
- (a) pressure-temperature ratings
- (b) size and method of designating openings of reducing fittings
- (c) marking
- (d) materials
- (e) dimensions and tolerances
- (f) threading
- (g) coatings
ASME/ANSI B16.4 - 1998 - Cast Iron Threaded Fittings
This Standard for gray iron threaded fittings, Classes 125 and 250
covers:
- (a) pressure-temperature ratings
- (b) size and method of designating openings of reducing fittings
- (c) marking
- (d) material
- (e) dimensions and tolerances
- (f) threading, and
- (g) coatings
ASME/ANSI B16.5 - 1996 - Pipe Flanges and Flanged Fittings
The ASME B16.5 - 1996 Pipe Flanges and Flange Fittings standard
covers pressure-temperature ratings, materials, dimensions,
tolerances, marking, testing, and methods of designating openings
for pipe flanges and flanged fittings.
The standard includes flanges with rating class designations 150,
300, 400, 600, 900, 1500, and 2500 in sizes NPS 1/2 through NPS 24,
with requirements given in both metric and U.S units. The Standard
is limited to flanges and flanged fittings made from cast or forged
materials, and blind flanges and certain reducing flanges made from cast, forged, or
plate materials. Also included in this Standard are requirements
and recommendations regarding flange bolting, flange gaskets, and
flange joints.
ASME/ANSI B16.9 - 2001 - Factory-Made Wrought Steel Buttwelding
Fittings
This Standard covers overall dimensions, tolerances, ratings,
testing, and markings for wrought factory-made buttwelding fittings
in sizes NPS 1/2 through 48 (DN 15 through 1200).
ASME/ANSI B16.10 - 2000 - Face-to-Face and End-to-End Dimensions of
Valves
This Standard covers face-to-face and end-to-end dimensions of
straightway valves, and center-to face and center-to-end dimensions
of angle valves. Its purpose is to assure installation
interchangeability for valves of a given material, type size,
rating class, and end connection
ASME/ANSI B16.11 - 2001 - Forged Steel Fittings, Socket-Welding and
Threaded
This Standard covers ratings, dimensions, tolerances, marking and
material requirements for forged fittings, both socket-welding and
threaded.
